首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于鲁棒二自由度增益自适应Smith预估器的冷轧厚度计型AGC
引用本文:陈连贵,杨卫东,杨斌虎.基于鲁棒二自由度增益自适应Smith预估器的冷轧厚度计型AGC[J].北京科技大学学报,2007,29(6):632-635.
作者姓名:陈连贵  杨卫东  杨斌虎
作者单位:1. 北京科技大学信息工程学院,北京,100083;湖南华菱涟钢冷轧厂,娄底,417009
2. 北京科技大学信息工程学院,北京,100083
摘    要:综合考虑冷轧厚度计型AGC(automatic gauge control)控制对象模型的渐变性以及在低速轧制时大时延引起的厚度反馈较大时滞,提出一种冷轧厚度计型AGC控制的改进方法来减弱这些系统不确定性和厚度反馈时滞带来的不利影响. 推导出针对任意阶对象的增益自适应调节律,并给出了在保证系统鲁棒稳定条件下的控制器和滤波器参数选取原则. 仿真结果证明这一新方法可有效地抑制干扰,而且在对象参数摄动时系统具有鲁棒稳定性.

关 键 词:冷轧  AGC  鲁棒性  二自由度  增益自适应  Smith预估器  鲁棒稳定性  二自由度  增益自适应  Smith  预估器  冷轧  厚度计型  robust  参数摄动  抑制干扰  改进方法  仿真结果  选取原则  滤波器参数  控制器  稳定条件  系统不确定性  调节律  对象模型  任意阶
修稿时间:2006-06-152006-12-10

Cold-rolling gaugemeter-type AGC based on robust two-degrees-freedom and gain-adaptive Smith-predictor
CHEN Liangui,YANG Weidong,YANG Binghu.Cold-rolling gaugemeter-type AGC based on robust two-degrees-freedom and gain-adaptive Smith-predictor[J].Journal of University of Science and Technology Beijing,2007,29(6):632-635.
Authors:CHEN Liangui  YANG Weidong  YANG Binghu
Institution:1 Information Engineering School, University of Science and Technology Beijing, Beijing 100083, China; 2 Tandem Cold Mill of Hunan Hualing Liangang, Loudi 417009, China
Abstract:In view of the changing of a clod-rolling gaugemeter-type automatic gauge control (AGC) model and the gauge feedback resulted from long time-delay under low-speed rolling, a modified method of gaugemeter-type AGC for cold-rolling to attenuate the bad influence resulted from uncertainties of the system was proposed. A new gain adaptive algorithm was deduced for an over two-order system with time-delay, and a principle for selecting controller parameters was given to ensure robust stability of the system. Simulation result shows that this method can effectively attenuate disturbance of the system, and stabilize the system when the parameters of the system is changing.
Keywords:cold rolling  AGC  robustness  two-degrees-of-freedom  gain-adaptive  Smith-predictor
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号