| 膜片钳仪的低噪声设计 |
| |
| 引用本文： | 周专,康华光.膜片钳仪的低噪声设计[J].华中科技大学学报(自然科学版),1990(3). |
| |
| 作者姓名： | 周专 康华光 |
| |
| 作者单位： | 华中理工大学自动控制工程系
(周专)，华中理工大学自动控制工程系(康华光) |
| |
| 摘 要： | 本文研制的PC-Ⅰ型膜片钳可以分辨细胞膜上离子单通道电流信号(1pA,10kHz).在分析PC-Ⅰ原理的基础上讨论了其抑制噪声、扩展频带、输入杂散电容和输入电阻的补偿技术.给出了PC-Ⅰ的1GΩ/0.1GΩ探头内用机械开关切换对杂散电容敏感的高阻值反馈电阻的有效方法。在信噪比足够高的条件下,仪器的测量误差≤2％。
|
| 关 键 词： | 膜片钳 电流噪声 探头工艺 参数补偿 |
A Low Noise Probe Design for the Patch Clamp |
| |
| Zhou Zhuan Kang Huaguang.A Low Noise Probe Design for the Patch Clamp[J].JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE,1990(3). |
| |
| Authors: | Zhou Zhuan Kang Huaguang |
| |
| Institution: | Zhou Zhuan Kang Huaguang |
| |
| Abstract: | The type POI patch clamp is a device with a high current resolution for single-channel ionic recording(1pA, 10 kHz) from biomembranes. The working principle of PC-I, the compensation of stray parameters and the low noise probe design are described. It has been found that the noise levels of the two FETs of an input dual-JFET U401 are different. Hence the proper selection of the input FET will be helpful as far as the reduction of system noise is concerned. The stray capacitance in the probe is always a problem for the feedback resistor with a great resistance (100 Mohm), especially when the exchange of these resistors by switches is desired. This has now been overcome with the mechanical switches used. The overall error of PC-I is less than 2%. |
| |
| Keywords: | Patch clamp Current noise Probe technology Stray parameters compensation |
| 本文献已被 CNKI 等数据库收录！ |
