| 大型压力容器法兰密封面现场修复加工装置的设计 |
| |
| 引用本文： | 赵学,张娜,巩建荣.大型压力容器法兰密封面现场修复加工装置的设计[J].兰州理工大学学报,2006,32(4):46-49. |
| |
| 作者姓名： | 赵学 张娜 巩建荣 |
| |
| 作者单位： | 兰州理工大学,机电工程学院,甘肃,兰州,730050;甘肃电力明珠集团有限公司,甘肃,兰州,730070 |
| |
| 摘 要： | 针对一些压力容器法兰密封面的最终成形工艺,介绍了一种装卡在被加工法兰孔中加工法兰端面密封槽的机械加工装置.装置的切削主运动由液压马达直接驱动,进给运动由步进电机驱动.进给运动的电机线路由炭刷滑环引出,用有线手提远程操作显示盒实现人机界面操作.该装置实现了压力容器法兰接口在现场进行简单、方便的机械加工及维修.
|
| 关 键 词： | 法兰密封面 现场加工 步进电机 CNC |
| 文章编号： | 1673-5196(2006)04-0046-04 |
| 收稿时间： | 2005-12-20 |
| 修稿时间： | 2005年12月20 |
Design of processing device for the spot recovery of flange sealing-face on large-sized pressure vessels |
| |
| ZHAO Xue,ZHANG Na,GONG Jian-rong.Design of processing device for the spot recovery of flange sealing-face on large-sized pressure vessels[J].Journal of Lanzhou University of Technology,2006,32(4):46-49. |
| |
| Authors: | ZHAO Xue ZHANG Na GONG Jian-rong |
| |
| Institution: | 1. College of Mechano-Electronic Engineering, Lanzhou Univ. of Tech. , Lanzhou 730050, China~ 2. Gansu Electric Power Mingzhu Group Co. Ltd, Lanzhou 730070, China |
| |
| Abstract: | Aimed at the final shaping process of flange sealing-face of several pressure vessel,a mechanically processing device fixed onto the flange hole of processed flange end surface for sealing groove processing was introduced.The principal motion of this of the tool is droved by device was driven by a hydraulic motor,its feed movement was driven by stepping motors.The circuit armature of the stepping motor was led out by using the module of carbon brush and collector ring.The device was controlled with a manually operated remote display box to realize man-machine interface for controlling.Using this device, the mechanical processing and fixing of flange sealing surface on the pressure vessels were simply and conveniently implemented on the spot. |
| |
| Keywords: | flange sealing-face processing on the spot stepping motor CNC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
