首页 | 本学科首页   官方微博 | 高级检索  
     

反应烧结碳化硅材料的Na_2CO_3熔盐腐蚀行为研究
引用本文:宁向梅,高积强,金志浩. 反应烧结碳化硅材料的Na_2CO_3熔盐腐蚀行为研究[J]. 西安交通大学学报, 2001, 0(9)
作者姓名:宁向梅  高积强  金志浩
作者单位:西安交通大学材料科学与工程学院!710049,西安,西安交通大学材料科学与工程学院!710049,西安,西安交通大学材料科学与工程学院!710049,西安
基金项目:国家自然科学基金资助项目 ( 5 9772 0 13 ),西安交通大学科学研究基金资助项目
摘    要:研究了在 10 0 0℃空气中的Na2 CO3 熔盐对反应烧结SiC材料的腐蚀行为 .研究结果表明 ,Na2 CO3 熔盐加速了材料的高温氧化失效 ,其腐蚀动力学过程主要包括 3个阶段 :第 1阶段是SiO2氧化膜快速溶解所造成的快速失重阶段 ;第 2阶段为材料表面液相膜形成所引起的快速氧化 (增重 )阶段 ;第 3阶段是由于熔体底部形成一层保护性SiO2 氧化膜所表现出的慢速氧化 (增重 )阶段 .因此 ,Na2 CO3 熔盐的作用使得材料表面形成大量蚀坑 .

关 键 词:碳化硅  熔盐  腐蚀

Corrosion of Reaction-Bonded Silicon-Carbide by Molten Sodium Carbonate
Ning Xiangmei,Gao Jiqiang,Jin Zhihao. Corrosion of Reaction-Bonded Silicon-Carbide by Molten Sodium Carbonate[J]. Journal of Xi'an Jiaotong University, 2001, 0(9)
Authors:Ning Xiangmei  Gao Jiqiang  Jin Zhihao
Abstract:Corrosion of reaction bonded silicon carbide is made by molten soium carbonate at 1000 degrees centigrade in air. Investigation shows that molten sodium carbonate accelerates the materials oxidation process at high temperature. The kinetics of corrosion includes three stages. The early stage is characterized by a period of weight loss, caused by the silica dissolution reaction. This is followed by a period of enhanced oxidation due to liquid film. Finally, a protective silica layer forms below the melt which down the reaction. Molten sodium carbonate corrosion leads to.a Large amount of pit.
Keywords:silicon carbide  molten sal  corrosion
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号