首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多孔SiC陶瓷的两种制备方法
引用本文:蔡宁,乔冠军,金志浩.多孔SiC陶瓷的两种制备方法[J].西安交通大学学报,2001,35(2):192-194.
作者姓名:蔡宁  乔冠军  金志浩
作者单位:1. 西安交通大学材料科学与工程学院,
2. 西安交通大学材料科学与工程学院, 710049, 西安
基金项目:国家自然科学基金资助项目(59872025).
摘    要:采用两种不同的方法制备多孔SiC陶瓷,讨论了其显微组织对性能的影响,探索了由天然木材经炭化、渗硅处理制造多孔SiC陶瓷的新方法。研究结果表明,半干压法制得的SiC陶瓷的气孔率随SiC粒度的增大而降低,且强度升高。由天然木材制得的多孔SiC陶瓷的新方法。研究结果表明,半干压法制得的SiC陶瓷的气孔率随SiC粒度的增大而降低,且强度升高。由天然木材制得的多孔SiC陶瓷的气孔形状较规则,且分布均匀,其表观气孔率可达40%以上,是制备高气孔率SiC陶瓷的一种可行技术。

关 键 词:多孔SIC陶瓷  显微组织  气孔率  制备方法
文章编号:0253-987X(2001)02-0192-03
修稿时间:2000年6月26日

Two Kinds of Preparations for Porous SiC Ceramics
Cai Ning,Qiao Guanjun,Jin Zhihao.Two Kinds of Preparations for Porous SiC Ceramics[J].Journal of Xi'an Jiaotong University,2001,35(2):192-194.
Authors:Cai Ning  Qiao Guanjun  Jin Zhihao
Abstract:Two kinds of methods were used to prepare porous SiC ceramics (PSC). The microstructure, porosity and strength were also discussed. A new technigue has been developed to produce the PSC materials from natural woods through carbonigation and silicon infiltration. The results show that the porosity of semi dry pressed PSC decreases with increasing particle size of PSC, which leads to a higher strength. The porous SiC ceramics made from natural woods are of high porosity, regular pore shape and well distributed phases.
Keywords:porous SiC ceramics  microstructure  porosity
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号