首页 | 本学科首页   官方微博 | 高级检索  
     检索      

驱动桥的整体有限元动态模拟
引用本文:郭年程,史文库,刘文军,荣如松,徐忠诚.驱动桥的整体有限元动态模拟[J].西安交通大学学报,2012,46(9):91-95.
作者姓名:郭年程  史文库  刘文军  荣如松  徐忠诚
作者单位:1. 吉林大学汽车仿真与控制国家重点实验室,130022,长春
2. 南京依维柯汽车有限公司车桥分公司,210028,南京
基金项目:国家高技术研究发展计划资助项目(2007220101002381)
摘    要:针对驱动桥试验只能得到桥壳表面振动数据的问题,采用驱动桥整体动态模拟方法来弥补试验数据的不足,从而获得驱动桥内部任意位置的应力、位移、加速度等数据.对驱动桥总成建立三维模型和有限元模型,通过驱动桥总成模态试验与有限元模态计算结果的对比方法,来验证有限元模型的正确性,对驱动桥整体做有限元动态模拟,并利用台架试验对动态模拟结果进行了验证.试验结果表明,驱动桥的整体动态模拟表面振动数据与试验数据相一致,得到的驱动桥内部数据为驱动桥的振动噪声研究提供了直观依据.

关 键 词:驱动桥  有限元  动态模拟  台架试验

Dynamic Finite Element Simulation for Driving Axle
GUO Niancheng , SHI Wenku , LIU Wenjun , RONG Rusong , XU Zhongcheng.Dynamic Finite Element Simulation for Driving Axle[J].Journal of Xi'an Jiaotong University,2012,46(9):91-95.
Authors:GUO Niancheng  SHI Wenku  LIU Wenjun  RONG Rusong  XU Zhongcheng
Institution:1.State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,China; 2.Axle Branch of Naveco Company Ltd.,Nanjing 210028,China)
Abstract:Dynamic simulation of whole driving axle is chosen to make up the shortcoming that only surface vibration data of driving axle can be obtained by the tests,thus the stress,displacement and acceleration at any position are revealed.A 3D model and a finite element model of driving axle is established and verified by comparing the results from modal tests and computing.The dynamic simulation for whole driving axle is conducted and verified by bench test.It demonstrates that the surface vibration data of dynamic simulation of whole driving axle coincide with that of the bench test,and the obtained driving axle interior data by dynamic simulation can directly support vibration and noise investigation of driving axle.
Keywords:driving axle  finite element analysis  dynamic simulation  bench test
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号