| 硅,锰和轧制工艺对双相钢组织与性能的影响 |
| |
| 引用本文： | 张国珍,田琮.硅,锰和轧制工艺对双相钢组织与性能的影响[J].北京科技大学学报,1994,16(2):148-153. |
| |
| 作者姓名： | 张国珍 田琮 |
| |
| 作者单位： | 北京科技大学材料科学与工程系，太原钢铁公司 |
| |
| 摘 要： | 利用Ｇｌｅｅｂｌｅ－１５００热模拟试验机对试验钢进行了模拟热轧。研究了合金元素硅，锰和终轧温度，轧后冷速和轧制变形对试验钢双相组织形成和性能的影响。结果表明：在试验工艺参数内，试验钢均获得双相组织，其稳定性较好，导出了估算热轧空冷Ｓｉ－Ｍｎ双相钢的ｆＭ和ｆＦＰ值的计算式，计算值和实测值吻合，热轧参数对试验钢硬度的影响较小。
|
| 关 键 词： | 热轧 双相钢 硅 锰 模拟 钢组织 |
The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels |
| |
| Zhang Guozhen, Tian Cong, Wu Jianying, Wanp Guobin, Wang Yide.The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels[J].Journal of University of Science and Technology Beijing,1994,16(2):148-153. |
| |
| Authors: | Zhang Guozhen Tian Cong Wu Jianying Wanp Guobin Wang Yide |
| |
| Abstract: | The experimental steels were hot-rolled by Gleeble-1500 hot-simulated testing machine, The effects of Si,Mn, final rolling temperature, after-rolled cooling rate and rolling deformation on the formation of dual-phase microstructure and property of experimental steels were studied.As a result, the experimental steels have good stability of formation of dual-phase microstructure within the range of experimental hot-rolling parameters, then the properties are also stable. |
| |
| Keywords: | hot-rolling-two-phase steels silicon manganese/as-hot-rolled dual-phase steels hot-simulated test |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
