| 金属硅化物在电阻薄膜材料中的应用 |
| |
| 引用本文： | 毛大立,张澜庭.金属硅化物在电阻薄膜材料中的应用[J].上海交通大学学报,1998,32(2):123-126. |
| |
| 作者姓名： | 毛大立 张澜庭 |
| |
| 作者单位： | 上海交通大学国家教委高温材料及高温测试开放实验室 |
| |
| 摘 要： | 研究了金属硅化物在电阻薄膜材料中的应用．用真空感应熔炼精密浇铸方法制备含铬和镍的硅化物，作为溅射沉积电阻薄膜的溅射阴极靶材．发现随着硅含量的增加，溅射得到的薄膜电阻值变大，Ｓｉ含量在５０％（质量分数）以上时，溅射阴极靶材的组成由ＣｒＳｉ２，ＮｉＳｉ两相变成Ｓｉ，ＣｒＳｉ２和ＮｉＳｉ２三相．所研制的三种型号的溅射阴极靶材适用于不同电阻值范围的电阻薄膜的溅射沉积，可在金属膜和金属氧化膜电阻器上应用．
|
| 关 键 词： | 硅化物 靶（电子束管） 溅射 薄膜电阻 |
Fabrication and Application of Silicides for Thin Film Resistor |
| |
| Mao Dali,Zhang Lanting,Xia Niansheng,Mao Lizhong,Wu Jiansheng.Fabrication and Application of Silicides for Thin Film Resistor[J].Journal of Shanghai Jiaotong University,1998,32(2):123-126. |
| |
| Authors: | Mao Dali Zhang Lanting Xia Niansheng Mao Lizhong Wu Jiansheng |
| |
| Abstract: | The fabrication of Ni/Cr silicide and its application in thin film resistor are dealt with. Sputtering targets containing Cr silicide and Ni silicide are produced by vacuum induction melt metallurgical method. With the increase of Si contents, the resistivity of the target increases accompanied with the phase changing from CrSi 2 and NiSi to Si,CrSi 2 and NiSi 2. The targets are used to sputter deposit metal thin film and oxide metal thin film resistors for electronics. |
| |
| Keywords: | silicides target(electron beam tubes) sputter thin film resistor |
| 本文献已被 CNKI 维普 等数据库收录！ |
