| 首饰加工废水处理工艺研究 |
| |
| 引用本文： | 高宜,于水利,许霞,王冬光.首饰加工废水处理工艺研究[J].哈尔滨商业大学学报(自然科学版),2009,25(1). |
| |
| 作者姓名： | 高宜 于水利 许霞 王冬光 |
| |
| 作者单位： | 哈尔滨工业大学,市政环境工程学院,哈尔滨,150090 |
| |
| 基金项目： | 国家重点基础研究发展规划(973计划) |
| |
| 摘 要： | 采用化学沉淀-混凝-砂滤-活性炭吸附组合工艺处理首饰加工废水,主要去除废水中的重金属及表面活性剂.试验考察了该组合工艺对污染物质的处理效果,同时考察投碱量及混凝剂投量对污染物去除的影响.结果表明,设计的组合工艺对此种首饰加工废水有较好的处理效果,废水中CODcr、Cu2+、Ni2+、SS等污染指标的总去除率分别达到95%、97%、50%及71%以上.经试验确定,投碱量为0.2 g/L、聚硅铁投量为0.01 g/L时处理效果最好.实际工程验收完毕后系统运行稳定,系统出水达到相应排放标准.
|
| 关 键 词： | 首饰加工废水 重金属 表面活性剂 聚硅铁 混凝 |
Study on jewelry machining wastewater treatment process |
| |
| GAO Yi,YU Shui-li,XU Xia,WANG Dong-guang.Study on jewelry machining wastewater treatment process[J].Journal of Harbin University of Commerce :Natural Sciences Edition,2009,25(1). |
| |
| Authors: | GAO Yi YU Shui-li XU Xia WANG Dong-guang |
| |
| Institution: | School of Municipal and Environmental Engineering;Harbin Institute of Technology;Harbin 150090;China |
| |
| Abstract: | The combined process of chemical sedimentation,coagulation,sand filtration and activated carbon adsorption are introduced to the jewelry machining wastewater treatment project to treat the heavy metal and surfactant in the water.The experiment reviews the effect of the combined technology,and the impact of the dosages is also investigated.The results show the combined technology gain preferable effect of treating jewelry machining wastewater.The removal rates of the CODcr,Cu2+,Ni2+,SS are above 95%,97%,50% ... |
| |
| Keywords: | jewelry machining wastewater heavy metal surfactant poly-silicate-ferric coagulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
