| 多层复合装甲优化设计 |
| |
| 引用本文： | 武海玲,钟涛,苗成,白利红,崔新忠,王彦莉,李辉,董园园.多层复合装甲优化设计[J].北京理工大学学报,2018,38(S2):173-177. |
| |
| 作者姓名： | 武海玲 钟涛 苗成 白利红 崔新忠 王彦莉 李辉 董园园 |
| |
| 作者单位： | 中国兵器科学研究院 宁波分院, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003;冲击环境材料技术重点实验室, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003,中国兵器科学研究院 宁波分院, 山东, 烟台 264003 |
| |
| 基金项目： | 国家装备预研专用技术项目（11111-00） |
| |
| 摘 要： | 以防14.5 mm穿燃弹为目标，针对考虑基体防护的多层复合装甲，结合研究成果在Florence模型中引入了反映表面驻留效应的系数，并结合德玛尔极限穿透公式，提出了一种多层复合装甲的优化设计方法.设计了相应的防护结构，并进行了靶试验证.研究计算及试验结果表明，采用本优化方法确定的设计方案较传统方案在防护能力更高的前提下可减重21%，可以用来实现复合结构的轻量化设计，有利于面板、背板和基体装甲的结构匹配优化.
|
| 关 键 词： | 优化设计 多层复合装甲 基体 |
| 收稿时间： | 2018/11/20 0:00:00 |
Optimization of Multi-Layer Component Armor |
| |
| WU Hai-ling,ZHONG Tao,MIAO Cheng,BAI Li-hong,CUI Xin-zhong,WANG Yan-li,LI Hui and Dong Yuan-yuan.Optimization of Multi-Layer Component Armor[J].Journal of Beijing Institute of Technology(Natural Science Edition),2018,38(S2):173-177. |
| |
| Authors: | WU Hai-ling ZHONG Tao MIAO Cheng BAI Li-hong CUI Xin-zhong WANG Yan-li LI Hui and Dong Yuan-yuan |
| |
| Institution: | Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China,Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China;Science and Technology on Materials in Impact Environment Laboratory, Yantai, Shandong 264003, China,Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China,Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China,Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China,Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China,Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China and Ningbo Branch of China Academy of Ordnance Science, Yantai, Shandong 264003, China |
| |
| Abstract: | Based on research of Florence model which incorporates coefficients reflecting surface dwell effect and Demar formula of ultimate penetration, an optimized method of multi-layer ceramic component armor taking basic armor into account was advanced. With the 14.5mm Armor Piercing (AP) ammunition penetrating component armor, defending armor was designed and validated by tests. It was found that the newly-designed armors have 9.8% lighter weight compared with traditional ones, which helps to optimize structure matching of face-plate, backboard and basic armor. |
| |
| Keywords: | optimization multi-layer component armor basic armor |
|
| 点击此处可从《北京理工大学学报》浏览原始摘要信息 |
| 点击此处可从《北京理工大学学报》下载免费的PDF全文 |
|
