| 约束屈曲支撑受力性能及高阶模态分析 |
| |
| 引用本文： | 王秀丽,苏成江. 约束屈曲支撑受力性能及高阶模态分析[J]. 兰州理工大学学报, 2007, 33(5): 105-108 |
| |
| 作者姓名： | 王秀丽 苏成江 |
| |
| 作者单位： | 兰州理工大学,土木工程学院,甘肃,兰州,730050 |
| |
| 基金项目： | 国家自然科学基金(50678078) |
| |
| 摘 要： | 应用ANSYS对约束屈曲支撑在静力往复荷载作用下的受力性能进行模拟,通过计算得到支撑滞回曲线以及其内部应力分布状况.追踪支撑内核高阶模态屈曲的过程,结果表明约束屈曲支撑具有良好的耗能特性.通过对14个不同缝隙和5个不同摩擦系数的约束屈曲支撑进行计算,得出缝隙和摩擦力对约束屈曲支撑内力的影响.应确定合理的缝隙尽量减小磨擦力.
|
| 关 键 词： | 约束屈曲支撑 静力往复荷载 滞回性能 |
| 文章编号： | 1673-5196（2007）05-0105-04 |
| 修稿时间： | 2007-03-19 |
Analysis of mechanical behavior and high-order mode of buckling-restrained bracing |
| |
| WANG Xiu-li,SU Cheng-jiang. Analysis of mechanical behavior and high-order mode of buckling-restrained bracing[J]. Journal of Lanzhou University of Technology, 2007, 33(5): 105-108 |
| |
| Authors: | WANG Xiu-li SU Cheng-jiang |
| |
| Affiliation: | College of Civil Engineering, Lanzhou Univ. of Tech. , Lanzhou 730050, China |
| |
| Abstract: | The bearing performance of buckling-restrained brace under horizontal low cycle loading BRB was simulated by using commercial software ANSYS.The supporting hysteretic carve and distribution of the internal forces of buckling-restrained brace were obtained by means of computation and high-order mode buckling process was tracked down.The results demonstrated that there was a good energy consumption characteristics with this kind of bracing.The influence of the gap between core steel-plate and exterior concrete as well as friction force of BRB on internal forces was obtained through analysis of fourteen models with different gaps and five models with different friction coefficients,so that reasonable gaps should be determined and the friction decreased. |
| |
| Keywords: | buckling restrained bracing static cyclic loading hysteretic characteristics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
