| 空气等离子弧切割工艺研究 |
| |
| 引用本文： | 刘蔚倩. 空气等离子弧切割工艺研究[J]. 湖南理工学院学报：自然科学版, 2006, 19(2): 36-37 |
| |
| 作者姓名： | 刘蔚倩 |
| |
| 作者单位： | 湖南理工学院机电系 湖南岳阳414000 |
| |
| 摘 要： | 对影响等离子弧的参数进行分析和试验,选取了4个主要因素,即压缩空气压力、割枪高度、电极到喷嘴的距离和切割速度,通过试验找出最佳切割参数,并提出了采用双机并联的方法可显著提高切割质量。
|
| 关 键 词： | 空气等离子弧切割 切割工艺 切割质量 |
| 文章编号： | 1672-5298（2006）02-0036-02 |
| 收稿时间： | 2005-10-26 |
| 修稿时间： | 2005-10-26 |
Research on the craft of air plasma arc cut |
| |
| LIU Wei-qian. Research on the craft of air plasma arc cut[J]. Journal of Hunan Institute of Science and Technology, 2006, 19(2): 36-37 |
| |
| Authors: | LIU Wei-qian |
| |
| Abstract: | Through analysis and experiment on affecting the parameter of the plasma arc,four main factors were selected,which were compressed,cutting high gun,electrode to the nozzles distance and cutting speed.The best cutting parameter through the experiment is discovered,and the way of using the parallel method to enhance remarkably the quality of cut is proposed. |
| |
| Keywords: | air plasma arc cut cutting craft quality of cut |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
