| 不锈钢纤维增强ZA43复合材料的常压铸渗工艺 |
| |
| 引用本文： | 王久志,卢艳青,刘英义.不锈钢纤维增强ZA43复合材料的常压铸渗工艺[J].鞍山科技大学学报,2001,24(6):401-405. |
| |
| 作者姓名： | 王久志 卢艳青 刘英义 |
| |
| 作者单位： | 鞍山钢铁学院材料科学与工程学院 辽宁鞍山114002
(王久志，卢艳青)，鞍山钢铁学院材料科学与工程学院 辽宁鞍山114002(刘英义) |
| |
| 摘 要： | 通过常压铸渗工艺制备了不锈钢纤维增强ZA43合金复合材料 ,分析了浸渗时间 ,N2 保护对浸渗过程和复合效果的影响 .研究结果表明 ,在一定时间和体积比下 ,浸渗过程宏观上是完全的 ,所获得的复合材料硬度和耐磨性都有不同程度的提高 ,但纤维与基体界面杂质和反应的控制还需进一步研究
|
| 关 键 词： | 金属基复合材料 铸渗工艺 纤维增强 |
| 文章编号： | 1000-1654(2001)06-0401-05 |
| 修稿时间： | 2001年7月15日 |
On Pressureless Infiltration Process of Stainless Steel Fiber-Reinforced ZA43 Composite |
| |
| WANG Jiu_zhi,LU Yan_qing,LIU Ying_yi.On Pressureless Infiltration Process of Stainless Steel Fiber-Reinforced ZA43 Composite[J].Journal of Anshan University of Science and Technology,2001,24(6):401-405. |
| |
| Authors: | WANG Jiu_zhi LU Yan_qing LIU Ying_yi |
| |
| Abstract: | Stainless steel fiber_reinforced ZA43 composite was obtained by pressureless infiltration process.The influence of infiltrating time and N 2 protection on infiltrating process and final combination effects are analyzed in this paper.The reseach shows that,with a proper ratio of time and volume,the infiltrating is compelte from the point of macrostructure,and the composite obtained are improved in its stiffness of wear resistance.But how to avoid contaminating the interface between fiber and base alloy needs more studies. |
| |
| Keywords: | metal matrix composites infiltration process fiber reinforcement |
| 本文献已被 CNKI 等数据库收录！ |
