一个用于流水线模数转换器的高精度、低功耗采样保持电路

介绍了一个用于高精度模数转换器，采用 0.25μm CMOS工艺的高性能采样保持电路。该采样保持电路的采样频率为 20MHz，允许最大采样信号频率为 10MHz，在电源电压为 2.5V 的情况下，采样信号全差分幅度为 2V。通过采用全差分flip-around结构，而非传统的电荷传输构架，因而在同等精度下，大大降低了功耗。为了提高信噪比，采用自举开关。Hspice仿真结构显示：在输入信号为 5MHz 的情况下，无杂散动态范围（SFDR）为 92.4dB. 该电路将被用于一个14位 20MHz 流水线模数转换器。

A High Resolution Low Power Sample and Hold Module Dedicated to a Pipelined ADC

A high performance sample-and-hold(S/H) circuit dedicated to a high resolution analog to digital converter is designed and implemented in 0.25μm CMOS process. The sampling rate of this proposed S/H module is 20MHz with a bandwidth of 10MHz, the full scale of the sampled fully differential signal is 2V with the 2.5V power supply. Instead of the traditional charge transfer architecture, a fully differential flip-around architecture is used to reduce the power consumption. In order to improve the signal to noise ratio(SNR), a bootstrapped switch is implemented in two places. Hspice simulation shows that it achieves a SFDR of 92.4dB for 5MHz input signal. This circuit is integrated to one 14bit 20MHz pipelined ADC.