| 45钢橡胶成型模具热处理工艺的研究 |
| |
| 引用本文： | 高为国,傅彩明,胡凤兰,郭建新,王高升.45钢橡胶成型模具热处理工艺的研究[J].湖南工程学院学报(自然科学版),2007,17(3):25-27. |
| |
| 作者姓名： | 高为国 傅彩明 胡凤兰 郭建新 王高升 |
| |
| 作者单位： | 湖南工程学院,机械工程系,湖南,湘潭,411101 |
| |
| 摘 要： | 主要研究了45钢橡胶成型模具的热处理工艺,以及热处理工艺对其组织和性能的影响.通过深入了解和分析45钢橡胶成型模具的工作条件、失效形式和性能要求,结合45钢的热处理工艺与其组织和性能之间的关系,通过试验研究确定出了较为理想的热处理工艺及参数,从而提高了模具的使用寿命,降低了生产成本.
|
| 关 键 词： | 成型模具 热处理工艺 组织 性能 |
| 文章编号： | 1671-119X(2007)03-0025-03 |
| 修稿时间： | 2007年1月20日 |
Research on Heat-treatment Technology of Steel 45 Rubber Forming Dies |
| |
| GAO Wei-guo,FU Cai-ming,HU Feng-lan,GUO Jian-xin,WANG Gao-sheng.Research on Heat-treatment Technology of Steel 45 Rubber Forming Dies[J].Journal of Hunan Institute of Engineering(Natural Science Edition),2007,17(3):25-27. |
| |
| Authors: | GAO Wei-guo FU Cai-ming HU Feng-lan GUO Jian-xin WANG Gao-sheng |
| |
| Abstract: | This article studies the heat-treatment technology of steel 45 rubber forming dies and the influence of the heat-treatment technology on its microstructure and properties.By analyzing the working conditions,lose efficacy form and property requirement,by establishing the relationship between the heat-treatment technology and its microstructure and properties and by experimenting,better heat-treatment technology and parameter are determined.As a result,the dies life is extended and the production cost is reduced. |
| |
| Keywords: | forming dies heat-treatment technology microstructure property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
