| 影响铸造涂料工艺性能的因素分析 |
| |
| 引用本文： | 赵占西 周洪. 影响铸造涂料工艺性能的因素分析[J]. 河海大学常州分校学报, 2000, 14(3): 7-12 |
| |
| 作者姓名： | 赵占西 周洪 |
| |
| 作者单位： | 河海大学机电工程学院,江苏常州 |
| |
| 摘 要： | 通过正交实验研究,测试了铸造涂料的碾压工艺、原材料以及原材料的处理工艺对涂料的悬浮性、表面强度、发气量等主要工艺性能的影响。结果表明：当选用轮碾机制作铸造涂料时,碾压时间达到１．５小时即可满足工艺性能的要求;涂料中无论是粘结剂还是悬浮剂的增加均会大幅度提高涂料的表面强度和悬浮性。
|
| 关 键 词： | 铸造涂料 表面强度 发气量 |
Influential Factor Analyzing on the Technologic Performance of Coating |
| |
| ZHAO Zhan Xi,ZHOU Hong,XING Xi Zhe [WT.,.BZ]. Influential Factor Analyzing on the Technologic Performance of Coating[J]. Journal of Hohai University Changzhou, 2000, 14(3): 7-12 |
| |
| Authors: | ZHAO Zhan Xi ZHOU Hong XING Xi Zhe [WT. .BZ] |
| |
| Affiliation: | ZHAO Zhan Xi,ZHOU Hong,XING Xi Zhe [WT10.5,10.25BZ] |
| |
| Abstract: | In this paper,the influence factor of making technics,materials on the suspension,surface intensity and gas of coating were discussed.The results are as follows:the milling time 1.5hr is adequate when using the equipment to mill the coating;the surface intensity and the suspension will increase when the binder or the suspension is increased. |
| |
| Keywords: | coating technological performance suspension surface intensity gas of coating |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
