| 某典型折叠机构的磨损寿命研究及优化 |
| |
| 引用本文： | 张娟.某典型折叠机构的磨损寿命研究及优化[J].科学技术与工程,2012,12(32):8588-8591. |
| |
| 作者姓名： | 张娟 |
| |
| 作者单位： | 1. 西北工业大学力学与土木建筑学院,西安,710072
2. 西安航天动力研究所,西安,710100 |
| |
| 基金项目： | 西北工业大学基础研究基金 |
| |
| 摘 要： | 针对航空航天柔性机构具有复杂非线性的特点,提出一种在多软件平台下建立柔性机构模型并进行运动学仿真的方法。对某典型折叠机构进行参数化建模及运动学分析,并采用不同可靠性分析方法对折叠机构进行可靠性分析和磨损寿命分析。最后对机构进行磨损寿命优化。优化结果显示机构最大应力水平显著降低,磨损寿命显著提高。
|
| 关 键 词： | 折叠机构 参数化建模 可靠性分析 磨损寿命 优化 |
| 收稿时间： | 6/27/2012 9:54:42 AM |
| 修稿时间： | 7/26/2012 6:43:14 PM |
Study and Optimization on Typical Folding Mechanism's Wear Life |
| |
| zhang juan.Study and Optimization on Typical Folding Mechanism's Wear Life[J].Science Technology and Engineering,2012,12(32):8588-8591. |
| |
| Authors: | zhang juan |
| |
| Institution: | 1(Department of Engineering Mechanics,Northwestern Polytechnical University1,Xi’an 710072,P.R.China; Xi’an Aerospace Propulsion Institute2,Xi’an 710100,P.R.China) |
| |
| Abstract: | A method of modeling and kinematics simulating of a typical flexible folding mechanism in multi-software platform was proposed in this paper, which aimed at its complex nonlinear dynamic characters. Based on this method, parameterized modeling and kinematics simulation of a typical folding mechanism was put forward firstly, and then the reliability analysis and wear lifetime analysis of folding mechanism were studied through different reliability analysis methods. Finally, the wear life of such mechanism was optimized. The optimization results showed that the Maximum stress level was decreased and the wear life was increased significantly. |
| |
| Keywords: | Folding Mechanism Parameterized Modeling Reliability Analysis Wear Life Optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《科学技术与工程》浏览原始摘要信息 |
| 点击此处可从《科学技术与工程》下载免费的PDF全文 |
|
