| 后混式磨料射流清洗油管涂料的实验研究 |
| |
| 引用本文： | 徐依吉 程燕良 赵付国. 后混式磨料射流清洗油管涂料的实验研究[J]. 西南石油大学学报(自然科学版), 2003, 25(1): 70-73. DOI: 10.3863/j.issn.1000-2634.2003.01.021 |
| |
| 作者姓名： | 徐依吉 程燕良 赵付国 |
| |
| 作者单位： | 1.石油大学(华东),山东 东营 257002;2.胜利油田孤岛采油厂 |
| |
| 摘 要： | 通过对后混合式磨料射流清洗油管涂料的实验研究,得出了后混合式磨料射流清洗油管涂料的清洗效率与喷嘴直径、喷距、喷射角以及颗粒直径的关系。后混式磨料射流清洗油管涂料的清洗效率随喷嘴直径的增大而增大,喷距、喷射角和磨料颗粒直径最佳参数值分别为250 mm、90°和0.8 mm。
|
| 关 键 词： | 磨料喷嘴 清洗 后混 |
| 收稿时间： | 2002-04-28 |
EXPERIMENT OF THE POSTMIXED ABRASIVE JET CLEANING OIL TUBE COATING |
| |
| XU Yi-ji CHENG Yan-liang Zhao Fu-guo et al. EXPERIMENT OF THE POSTMIXED ABRASIVE JET CLEANING OIL TUBE COATING[J]. Journal of Southwest Petroleum University(Seience & Technology Edition), 2003, 25(1): 70-73. DOI: 10.3863/j.issn.1000-2634.2003.01.021 |
| |
| Authors: | XU Yi-ji CHENG Yan-liang Zhao Fu-guo et al |
| |
| Affiliation: | University of Petroleum, Dongying Shandong 257002, China |
| |
| Abstract: | By the experiment of the postmixed abrasive jet cleaning oil tube coating, it was concluded that the efficiency of the postmixed abrasive jet cleaning oil tube coating was related to nozzle diameter, standoff distance, jet angle and diameter of abrasivegrain, that the efficiency of the postmixed abrasive jet cleaning oil tube coating increased with the diameter of nozzle, the opti-mum value of standoff distance is 250 mm, of jet angle is 90 degree and of grain diameter is 0.8 mm. |
| |
| Keywords: | abrasive jet flushing postmixed |
|
| 点击此处可从《西南石油大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《西南石油大学学报(自然科学版)》下载全文 |
