| 时效工艺对1．0％Ni—5．0％Sn铝合金组织和硬度的影响 |
| |
| 引用本文： | 逯允海,吕英怀,王艳,李爱茹,王晓明. 时效工艺对1．0％Ni—5．0％Sn铝合金组织和硬度的影响[J]. 燕山大学学报, 1994, 0(1) |
| |
| 作者姓名： | 逯允海 吕英怀 王艳 李爱茹 王晓明 |
| |
| 作者单位： | 东北重型机械学院，富裕林业机械厂 |
| |
| 摘 要： | 本文对１．０％Ｎｉ—５．０％Ｓｎ铝合金进行了不同时效工艺的热处理试验，探讨了不同时效规范对铝合金的显微组织和布氏硬度的影响．结果表明：合理的时效规范可使１．０％Ｎｉ—５．０％Ｓｎ铝合金得到细密均匀的组织，使合金的硬度达到ＨＢ６０Ｋｇｆ／ｍｍ２以上，从而满足使用性能的要求
|
| 关 键 词： | 铝合金；时效 |
The Influence of Different Aging Process on The Structure and Hardness of 1.0% Ni-5. 0%Sn Aluminium-alloy |
| |
| LU Yunhai, LU Yinghuai, WANG Yan. The Influence of Different Aging Process on The Structure and Hardness of 1.0% Ni-5. 0%Sn Aluminium-alloy[J]. Journal of Yanshan University, 1994, 0(1) |
| |
| Authors: | LU Yunhai LU Yinghuai WANG Yan |
| |
| Affiliation: | LU Yunhai; LU Yinghuai; WANG Yan (Northeast heavy machinery institute)LI Airu; WANG Xiaoming (Fuyu forestry machinery factory) |
| |
| Abstract: | In this paper, the heat treatment test on 1.0% Ni-5. 0% Sn Aluminium-alloy in different aging process was done, and the influence of different aging process on micro-Structure and Brinel hardness of aluminium-alloy was discussed. The result shows: rational aging process may make 1. 0% Ni-5.0% Sn aluminium-alloy get fine,well-distr ibuted structure and Brinel hardness is above 60 kg/mm. |
| |
| Keywords: | aluminium-alloy aging |
| 本文献已被 CNKI 等数据库收录！ |
