| 曲面切槽晶体单色器设计 |
| |
| 引用本文： | 康乐,董晓浩,凤良杰,李中亮,赵飞云,徐朝银.曲面切槽晶体单色器设计[J].中国科学技术大学学报,2007,37(4):525-529,535. |
| |
| 作者姓名： | 康乐 董晓浩 凤良杰 李中亮 赵飞云 徐朝银 |
| |
| 作者单位： | 中国科学技术大学国家同步辐射实验室,安徽合肥,230029 |
| |
| 摘 要： | 讨论了曲面切槽单色器的工作原理，并依据合肥光源上的XAFS光学参数，设计加工出晶体的切槽曲面，测量了曲面的形位误差，进而分析了曲面加工、定位误差以及入射光的束宽对单色器分光性能的影响．在测量所得的加工误差下，考虑由于束流宽束给衍射性能造成的影响，计算了实际晶体相对于理想晶体的理论衍射效率．计算结果证明该晶体单色器完全适用于合肥光源的XAFS光晕系统．
|
| 关 键 词： | 曲面切槽 晶体单色器 非对称系数 能量扫描 |
| 文章编号： | 0253-2778（2007）04＆05-0525-05 |
| 修稿时间： | 2006-12-252007-03-28 |
Design of channel cut monochromator with curved diffracting surfaces |
| |
| KANG Le,DONG Xiao-hao,FENG Liang-jie,LI Zhong-liang,ZHAO Fei-yun,XU Chao-yin.Design of channel cut monochromator with curved diffracting surfaces[J].Journal of University of Science and Technology of China,2007,37(4):525-529,535. |
| |
| Authors: | KANG Le DONG Xiao-hao FENG Liang-jie LI Zhong-liang ZHAO Fei-yun XU Chao-yin |
| |
| Institution: | National Synchrotron Radiation Laboratory, University of Science and Technology of China, He f ei 230029, China |
| |
| Abstract: | A monolithic channel cut monochromator with curved surfaces was designed based on the parameters of the XAFS beamline at NSRL. The principle of energy scanning with single movement, processing of the curved surfaces, measuring of the reflecting surfaces and effects of the beam deviation from the center on diffracted performance were discussed. Based on the position error and the effect of the width of the beam, the efficiency of the real crystal relative to the academic crystal was calculated. The results show that the monochromator is competent for the optical system of XAFS measurement. |
| |
| Keywords: | channel cut with curved surfaces crystal monochromator asymmetry factor energy scanning |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
