| (TiB2+Al2O3)增强铝基复合材料的制备工艺 |
| |
| 引用本文： | 兰晔峰,张保林,杨明. (TiB2+Al2O3)增强铝基复合材料的制备工艺[J]. 兰州理工大学学报, 2009, 35(3) |
| |
| 作者姓名： | 兰晔峰 张保林 杨明 |
| |
| 作者单位： | 兰州理工大学,材料科学与工程学院,甘肃,兰州,730050;兰州理工大学,材料科学与工程学院,甘肃,兰州,730050;兰州理工大学,材料科学与工程学院,甘肃,兰州,730050 |
| |
| 摘 要： | 将TiO2和B2O3原料混合后加入铝熔体,采用原位反应的方法,使其与铝液发生反应,制备出(TiB2+Al2O3)双相增强铝基复合材料.研究反应物加入量、反应时间、搅拌强度对复合材料的组织形貌产生的影响.结果表明,反应物加入体积分数为20%,反应时间为20 min,较大搅拌强度条件下原位生成的增强颗粒明显增多,晶粒细小,分布均匀.
|
| 关 键 词： | 原位反应 复合材料 TiB2+Al2O3颗粒 微观组织 |
Preparative process of aluminum-based composite strengthened with (TiB_2+Al_2O_3) |
| |
| LAN Ye-feng,ZHANG Bao-lin,YANG Ming. Preparative process of aluminum-based composite strengthened with (TiB_2+Al_2O_3)[J]. Journal of Lanzhou University of Technology, 2009, 35(3) |
| |
| Authors: | LAN Ye-feng ZHANG Bao-lin YANG Ming |
| |
| Affiliation: | LAN Ye-feng,ZHANG Bao-lin,YANG Ming(College of Materials Science and Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China) |
| |
| Abstract: | In-situ reaction method was used to prepare aluminum-based composites with double-phase strengthening of(TiB2 + Al2O3) where the mixture of TiO2 and B2O3 was added into the aluminum melt,and their reaction with the aluminum fluid took place.The influence of additive volume,reaction time,and mixing intensity on the morphology of the composite was studied.The result indicated that when the volume of the additive was 20%,the reaction time was 20 min,and the mixing intensity was greater,the in-situ enhanced par... |
| |
| Keywords: | In-situ reaction composite TiB2 Al2O3 particles microstructure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
