|
|||||
|
|
| 镀锌钢丝干式拉拔工艺参数探讨 | |
| 引用本文： | 马明刚,黄忠渠,张金柱. 镀锌钢丝干式拉拔工艺参数探讨[J]. 贵州工业大学学报(自然科学版), 2006, 35(1): 58-61 |
| 作者姓名： | 马明刚 黄忠渠 张金柱 |
| 作者单位： | 1. 贵州大学,材料科学与工程学院,贵州,贵阳,550003;贵州钢绳股份有限公司,贵州,遵义,563000 2. 贵州钢绳股份有限公司,贵州,遵义,563000 3. 贵州大学,材料科学与工程学院,贵州,贵阳,550003 |
| 摘 要： | 对镀锌钢丝干式拉拔时采用不同总压缩率和拉丝模工作锥角度生产的产品力学性能和锌层质量进行试验研究,获得最佳工艺参数:总压缩率应小于52%,拉丝模工作锥角度应使钢丝与模具的实际接触长度大于4.00 mm. |
| 关 键 词： | 镀锌钢丝 中镀后拉 总压缩率 工作锥角度 |
| 文章编号： | 1009-0193（2006）01-0058-04 |
| 收稿时间： | 2005-12-20 |
| 修稿时间： | 2005-12-20 |
Technological Parameters Exploration of Galvanized Steel Wire Dry-drawing |
|
| MA Ming-gang,HUANG Zhong-qu,ZHANG Jin-zhu. Technological Parameters Exploration of Galvanized Steel Wire Dry-drawing[J]. Journal of Guizhou University of Technology(Natural Science Edition), 2006, 35(1): 58-61 | |
| Authors: | MA Ming-gang HUANG Zhong-qu ZHANG Jin-zhu |
| Affiliation: | 1. College of Materials Science and Metallurgy Engineering, Guizhou University, Guiyang 550003, China;2. Guizhou Wire Rope Co., Ltd, Zunyi. 563000, China |
| Abstract: | The mechanical properties and zinc coat mass of the productions,which are produced at various total draughts and work cone angles of wire drawing die by galvanized steel wire dry-drawing,are experimentally studied.The optimum technological parameters is acquired:total draught should be 52% less,work cone angles of wire drawing die should make the actually contacting length between steel wire and wire drawing die larger than 4.00mm. |
| Keywords: | galvanized steel wire drawing after medium hot-dip galvanizing total draught work cone angles |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |