| 熔盐泵轴承冷却及润滑系统的分析 |
| |
| 引用本文： | 杨敏官,高波,贾卫东,王春林,吴纳新. 熔盐泵轴承冷却及润滑系统的分析[J]. 江苏大学学报(自然科学版), 2005, 26(2): 149-152 |
| |
| 作者姓名： | 杨敏官 高波 贾卫东 王春林 吴纳新 |
| |
| 作者单位： | 江苏大学能源与动力工程学院,江苏,镇江,212013;镇江金河纸业有限公司,江苏,镇江,212006 |
| |
| 基金项目： | 国家自然科学基金资助项目(50476068) |
| |
| 摘 要： | 针对熔盐泵轴承冷却及润滑系统存在的问题,对现有结构进行了对比分析.认为无论是脂润滑还是油润滑,水冷却能获得较好效果.在采用升油器进行润滑油循环时,提出升油器设计中升角选择β=10°~13°较合理;润滑油粘度υ=40~80m2 /s较合适;升油器径向间隙δ在0 2~0 3mm之间效果较好.油润滑风冷却结构的优劣还须在实践中检验.
|
| 关 键 词： | 熔盐泵 轴承 润滑 冷却 升油器 |
| 文章编号： | 1671-7775(2005)02-0149-04 |
| 修稿时间： | 2004-10-11 |
Analysis of cooling and lubricating system of bearings in pumps for melted salts |
| |
| YANG Min-guan,GAO Bo,JIA Wei-dong,WANG Chun-lin,WU Na-xin. Analysis of cooling and lubricating system of bearings in pumps for melted salts[J]. Journal of Jiangsu University:Natural Science Edition, 2005, 26(2): 149-152 |
| |
| Authors: | YANG Min-guan GAO Bo JIA Wei-dong WANG Chun-lin WU Na-xin |
| |
| Affiliation: | YANG Min-guan~1,GAO Bo~1,JIA Wei-dong~1,WANG Chun-lin~1,WU Na-xin~2 1.School of Energy and Power Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China, 2.Zhenjiang Gold River Pulp and Paper Ltd.,Zhenjiang,Jiangsu 212006,China) |
| |
| Abstract: | Current problems in cooling and lubricating system of bearings in pumps for melted salts are analysed and compared with the existing devices . It was found that whatever the lubricant is used, grease or oil, water-cooling can achieve better effect. When the lubricating oil is cycled with an oil-rising equipment, it is more reasonable to choose the rise-angle between 10 and 13 degrees, the viscosity of lubricating oil between 40 to 80 m~2/s and the radial clearance of oil-rising equipment in the range of 0 2 to 0 3 millimeters. The advantage and disadvantage of the device with oil-lubricating and wind-cooling are to be examined in further experiment. |
| |
| Keywords: | pumps melted salts bearings lubricating cooling oil-rising equipment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
