| 滑动轴承衬套孔合理尺寸偏差的确定 |
| |
| 引用本文： | 刘明庚,刘蕴新.滑动轴承衬套孔合理尺寸偏差的确定[J].天津科技大学学报,1997(1). |
| |
| 作者姓名： | 刘明庚 刘蕴新 |
| |
| 作者单位： | 北京印刷设备联合公司 |
| |
| 摘 要： | 分析了滑动轴承的轴径、衬套内外径和机架轴承部分孔径由于装配温度和工作温度与加工温度不同时，其尺寸的变化，及由于衬套与机架孔的过盈装配使衬套孔尺寸的缩小量。提出了确定衬套孔径合理尺寸偏差方法。
|
| 关 键 词： | 滑动轴承 间隙配合 最大实体状态 尺寸偏差 |
REASONABLE ESTABLISHMENT ON SIZE DEVIATION OF SLEEVE HOLE IN A PLAIN BEARING |
| |
| Lin Minggeng,Liu Yunxin.REASONABLE ESTABLISHMENT ON SIZE DEVIATION OF SLEEVE HOLE IN A PLAIN BEARING[J].Journal of Tianjin University of Science & Technology,1997(1). |
| |
| Authors: | Lin Minggeng Liu Yunxin |
| |
| Institution: | Lin Minggeng Liu Yunxin |
| |
| Abstract: | Considering size variation on shaft and sleeve and frame in a plain bearing because of temperature differance of cut to operation and assembly and considering narrowing of frame hole because of interference fit of bleeve to frame and depending on reasonable clearance of sleeve hole to shaft in during steady operation and smooth fit we establish reasonable size deviation on a sleeve hole. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
