| 基于高精度修磨轮包络精化圆柱蜗杆的理论研究 |
| |
| 引用本文： | 詹东安,王树人,刘洪斌,杨成,虞维廉,路俊秀.基于高精度修磨轮包络精化圆柱蜗杆的理论研究[J].天津大学学报(自然科学与工程技术版),2000,33(1):6-10. |
| |
| 作者姓名： | 詹东安 王树人 刘洪斌 杨成 虞维廉 路俊秀 |
| |
| 作者单位： | 詹东安（天津大学机械工程学院，天津300072）;王树人（天津大学机械工程学院，天津300072）;刘洪斌（天津大学机械工程学院，天津300072）;杨 成（河北电机股份有限公司，石家庄050021）;虞维廉（河北电机股份有限公司，石家庄050021）;路俊秀（河北电机股份有限公司，石家庄050021） |
| |
| 基金项目： | 国家自然科学基金资助项目(59775007)；河北省重大攻关课题资助项目． |
| |
| 摘 要： | 提出一种用修磨轮双自由度精化圆柱蜗杆的新方法，运用空间啮合原理对该方法进行了理论分析，推导出若干啮合分析方程工，从理论上验证并得出了用渐开线齿轮形修磨轮可精化出渐开线圆柱 的结论，通过对修磨齿形的特殊设计与制造还可精化其它齿形的圆柱螺杆 ，且效率高，成本低。
|
| 关 键 词： | 齿轮形修磨轮 圆柱蜗杆 啮合分析 修磨轮 |
| 文章编号： | 0493-2137(2000)01-0006-05 |
| 修稿时间： | 1999-05-30 |
THEORETICAL STUDY OF FINISH ENVELOPING CYLINDRICAL WORMS BASED ON HIGH PRECISION DRESSING GEARS |
| |
| ZHAN Dong-an,WANG Shu-ren,LIU Hong-bin,YANG Cheng,YU Wei-lian,LU Jun-xiu.THEORETICAL STUDY OF FINISH ENVELOPING CYLINDRICAL WORMS BASED ON HIGH PRECISION DRESSING GEARS[J].Journal of Tianjin University(Science and Technology),2000,33(1):6-10. |
| |
| Authors: | ZHAN Dong-an WANG Shu-ren LIU Hong-bin YANG Cheng YU Wei-lian LU Jun-xiu |
| |
| Institution: | ZHAN Dong-an
,WANG Shu-ren1
,LIU Hong-bin
;(School of Mechanical Engineering,Tianjin University,Tianjin 300072,China;);YANG Cheng
,YU Wei-lian
,LU Jun-xiu
;(Hebei Electric Motor Ltd,Shijiazhuang 050021,China) |
| |
| Abstract: | A new method is proposed,in which a cylindrical worm is ground by a dressing gear under the condition of two degrees of freedom movement.By means of the gear meshing theory,the theoretical study on the method is carried out.Some formulas for meshing analyses are derived.A conclusion is proved theoretically that an involute helicoid worm can be ground by an involute dressing gear.Through the special tooth profile of the dressing gears being designed and made,the cylindrical worms with other tooth profile could be ground in this way.The method has a higher machining efficiency and lower production cost. |
| |
| Keywords: | dressing gear cylindrical worm two degrees of freedom meshing analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
