首页 | 本学科首页   官方微博 | 高级检索  
     检索      

流率和牵引速度对两种聚合物熔体共挤出影响的数值研究
引用本文:吕静,陈晋南,胡冬冬.流率和牵引速度对两种聚合物熔体共挤出影响的数值研究[J].北京理工大学学报,2003,23(6):781-784.
作者姓名:吕静  陈晋南  胡冬冬
作者单位:北京理工大学,化工与环境学院,北京,100081
摘    要:利用流体计算软件包POLYFLOW对两种熔体的二维等温共挤出进行了数值模拟,重点讨论了两种熔体的流率比和牵引速度对共挤出流动情况、界面形状和挤出胀大的影响.模拟结果表明:流率比增大,两种熔体的壁面平均剪切粘度比增加,流动性差异增加,挤出物层比增加;牵引速度增加,界面平直段增加,挤出物截面减小。

关 键 词:共挤出  流率  牵引速度  挤出胀大  数值模拟
文章编号:1001-0645(2003)06-0781-04
收稿时间:2002/11/6 0:00:00
修稿时间:2002年11月6日

Numerical Study of the Effects of Flow Rate and Drawing Velocity on Bicomponent Coextrusion
LU Jing,CHEN Jin-nan and HU Dong-dong.Numerical Study of the Effects of Flow Rate and Drawing Velocity on Bicomponent Coextrusion[J].Journal of Beijing Institute of Technology(Natural Science Edition),2003,23(6):781-784.
Authors:LU Jing  CHEN Jin-nan and HU Dong-dong
Institution:School of Chemical Engineering and Environment, Beijing Institute of Technology, Beijing100081, China;School of Chemical Engineering and Environment, Beijing Institute of Technology, Beijing100081, China;School of Chemical Engineering and Environment, Beijing Institute of Technology, Beijing100081, China
Abstract:A numerical simulation of two-dimensional isothermal bicomponent coextrusion using the polymer fluid computational package POLYFLOW is presented. Effects of the flow rate ratio of the two kinds of molten polymers and drawing velocity on their flow, the interface shape and extrudate swelling are discussed. Simulation results indicate that, with the increase in volume ratio, ratio of the average wall shear viscosity for the two molten polymers increases. Consequently, difference in the flow properties and layer ratio of the extrudate are increased. With increases in drawing velocity, length of the flat part of the interface increases and profile of the extrudate decreases.
Keywords:coextrusion  flow rate  drawing velocity  swelling  numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《北京理工大学学报》浏览原始摘要信息
点击此处可从《北京理工大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号