| 具有预启动、防闩锁功能的1.33倍新型电荷泵设计 |
| |
| 引用本文： | 刘兴辉,杨宇. 具有预启动、防闩锁功能的1.33倍新型电荷泵设计[J]. 辽宁大学学报(自然科学版), 2009, 36(3): 219-223 |
| |
| 作者姓名： | 刘兴辉 杨宇 |
| |
| 作者单位： | 辽宁大学物理学院,辽宁省光电子功能器件与检测技术重点实验室,辽宁,沈阳,110036 |
| |
| 基金项目： | 辽宁省自然科学基金，辽宁大学博士科研启动基金 |
| |
| 摘 要： | 设计了一种基于外接泵电容的1.33倍新型电荷泵电路.电路采用了预启动和衬底电位选择结构,并利用三相时钟信号方式控制电荷泵的工作状态.采用0.5μmCMOS工艺模型利用Cadence的Specter工具进行了仿真.结果表明：所设计的电路提高了芯片的启动速度,有效防止了闩锁现象的产生;在典型的3.3 V输入电压下,电荷泵效率为93.25%.与传统电荷泵相比优势在于输出电压低,有效地降低了无用功耗.1.33倍电荷泵必将具有广泛地应用前景.
|
| 关 键 词： | 电荷泵 三相时钟 预启动 衬底电位 |
Design of the 1.33 Times Charge Pump Circuit With Pre-start and Anti-latch up Function |
| |
| LIU Xing-hui,YANG Yu. Design of the 1.33 Times Charge Pump Circuit With Pre-start and Anti-latch up Function[J]. Journal of Liaoning University(Natural Sciences Edition), 2009, 36(3): 219-223 |
| |
| Authors: | LIU Xing-hui YANG Yu |
| |
| Affiliation: | College of Physics;Liaoning University;Liaoning Province Key Laboratory of Photoelectronic Devices and Detection Technology;Shenyang 110036;China |
| |
| Abstract: | The 1.33 times voltage charge pump circuit based the extemal pump capacitance was designed. The pre - start circuit and substrate potential choice circuit were adopted. The latest three - phase clock signal control method was used to control the working state of charge pump. The Specter simulation results using 0. 5？ m CMOS process models indicate： the circuit design can effectively increase the start -up speed and effectively prevent a latch phenomenon. In a typical 3.3V input voltage, charge pump efficiency is 93.25%. Compared with the traditional charge pump circuit, our circuit can reduce power consumption due to low output voltage. The 1.33 times voltage charge pump circuit is bound to have broad application prospects. |
| |
| Keywords: | charge-pump three-phase clock pre-start circuit substrate potential. |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
