|
|||||
|
|
| 轧制过程工艺参数的测量与分析 | |
| 引用本文： | 张小平,张进之,张雪娜,何宗霖. 轧制过程工艺参数的测量与分析[J]. 太原科技大学学报, 2007, 28(6): 461-465 |
| 作者姓名： | 张小平 张进之 张雪娜 何宗霖 |
| 作者单位： | 1. 北京航空航天大学,北京,100083;太原科技大学,太原,030024 2. 北京钢铁研究总院,北京,100081 3. 太原科技大学,太原,030024 |
| 摘 要： | 变形抗力和摩擦系数是用于设定轧制过程控制模型的重要工艺参数。文章利用在不同润滑条件下得到的实测数据，估计出变形抗力K和摩擦系数μ的值。将估计出的K、μ从参数值应用于轧制过程控制，可以提高连轧过程控制模型的精度。在实验轧机上，应用铝试样实测了板宽、张力和压下率对前滑的影响规律。 |
| 关 键 词： | 实验 轧制压力 前滑 变形抗力 摩擦系数 |
| 文章编号： | 1673-2057（2007）06-0461-05 |
| 收稿时间： | 2007-04-28 |
| 修稿时间： | 2007-04-28 |
Measurement and Analysis of Technological Parameters of Rolling Process |
|
| ZHANG Xiao-ping,ZHANG Jin-zhi,ZHANG Xue-na,HE Zong-lin. Measurement and Analysis of Technological Parameters of Rolling Process[J]. Journal of Taiyuan University of Science and Technology, 2007, 28(6): 461-465 | |
| Authors: | ZHANG Xiao-ping ZHANG Jin-zhi ZHANG Xue-na HE Zong-lin |
| Abstract: | Resistance to deformation and friction coefficient are important parameters for the setting up of control model of continuous rolling process. Resistance to deformation K and friction coefficient/x were estimated by measured data of rolling process at different lubrication conditions. The estimated parameters can be used in the control of rolling process ,which improves the prediction precision of mathematical model. The influences of plate width, tension and screwdown ratio on forward slip were measured using aluminum samples on a 350mm experimental rolling mill of Taiyuan University of Science and Technology. |
| Keywords: | measurement rolling force forward slip resistance to deformation friction coefficient |
| 本文献已被 维普 万方数据 等数据库收录！ | |