| 不同晶粒度AL1060微铣削力及表面质量试验 |
| |
| 引用本文： | 高奇,巩亚东,蔡明.不同晶粒度AL1060微铣削力及表面质量试验[J].湖南科技大学学报(自然科学版),2017,32(4):32-37. |
| |
| 作者姓名： | 高奇 巩亚东 蔡明 |
| |
| 作者单位： | 1.东北大学 机械工程与自动化学院,辽宁 沈阳 110819;2.辽宁工业大学 机械工程与自动化学院,辽宁 锦州 121001 |
| |
| 基金项目： | 国家自然科学基金资助项目(51375082) |
| |
| 摘 要： | 采用直径为0.6 mm的硬质合金立铣刀对AL1060零件进行高速铣槽试验,采用单因素试验方法,研究分析主轴转速、铣削深度和进给速度对不同晶粒度AL1060零件微铣削力和表面质量的影响.结果表明:细晶AL1060零件相对粗晶AL1060零件微铣削力更大,表面质量更好,获得了定量试验数据,绘制了变化趋势图,对影响机理进行了揭示,为不同晶粒度材料的微加工性能提供理论参考及试验依据.
|
| 关 键 词： | 微铣削力 表面质量 晶粒度 |
Experimental Study on Micro-milling Force and Surface
Quality in Different Grain Size of AL1060 |
| |
| Gao Qi,Gong Yadong,Cai Ming.Experimental Study on Micro-milling Force and Surface
Quality in Different Grain Size of AL1060[J].Journal of Hunan University of Science & Technology(Natural Science Editon),2017,32(4):32-37. |
| |
| Authors: | Gao Qi Gong Yadong Cai Ming |
| |
| Institution: | 1. School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110819, China;
2. School of Mechanical Engineering & Automation, Liaoning University of Technology, Jinzhou 121001,China |
| |
| Abstract: | The slot milling experiment of AL1060 part was operated by carbide alloy tool with 0.6 mm diameter, the influence of the spindle speed, milling depth, feed rate on the micro-milling force and surface quality in different grain size of AL1060 was analyzed by adopting the method of single factor experiment. The result shows that the micro-milling force is bigger and the surface quality is better of fine-grain AL1060 part than coarse grain AL1060 part, the quantitative test data are obtained, the change trend chart is drew, and the influence mechanism are revealed, research theory and experimental reference are provided for the micro processing performance of different grain size material. |
| |
| Keywords: | micro-milling forces surface quality grain size |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《湖南科技大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《湖南科技大学学报(自然科学版)》下载免费的PDF全文 |
|
