木材干燥室内部风速场的数值模拟与优化 |
| |
引用本文: | 沙汀鸥,杨洁,吕欢,伊松林. 木材干燥室内部风速场的数值模拟与优化[J]. 南京林业大学学报(自然科学版), 2016, 59(1): 129-134. DOI: 10.3969/j.issn.1000-2006.2016.01.021 |
| |
作者姓名: | 沙汀鸥 杨洁 吕欢 伊松林 |
| |
作者单位: | 北京林业大学材料科学与技术学院,北京 100083 |
| |
基金项目: | 国家林业公益性行业科研专项项目 |
| |
摘 要: | 为了改善木材干燥室内部风速场的均匀性以提高干燥质量,对材堆到侧墙距离为0.30 m,风机风速分别为2.0、3.0、4.0 m/s的工况下木材干燥室内部风速场,采用Fluent进行数值模拟与分析,得到风速分布最佳时的工况。此外,在最优风速场工况下,通过改变材堆到侧墙距离(0.25、0.30、0.35 m),对试验结论进行验证。结果表明:对于顶风式木材干燥室,选择风机风速为3.0 m/s、材堆到侧墙距离0.30 m时,木材内部风速场最均匀,采用Fluent得到的模拟值与实际值相差不大。通过Fluent方法对木材干燥室内部风速场进行数值模拟,可有效优化风速场的均匀性。
|
关 键 词: | 木材干燥室 风速场 数值模拟 优化工况 |
Numerical simulation and optimization of the velocity field in wood drying kiln |
| |
Abstract: | To improve the uniformity of wind velocity field in wood drying kiln so as to improve wood drying quality, Fluent was taken to simulate and analyze the wind velocity field in wood drying kiln. The optimal velocity was measured and got under the conditions that the distance between the wood stack and the wood kiln wall was 0.30 m, and the air velocity of the fan were 2.0 m/s, 3.0 m/s and 4.0 m/s, respectively. Experimental results were verified at the optimal velocity under the conditions that the distance between the wood stack and the wood kiln wall were 0.25 m, 0.30 m and 0.35 m, respectively. Results showed that the uniform wind velocity field could be obtained under the conditions that the fan velocity was 3.0 m/s and the distance between the wood stack and the wood kiln wall was 0.30 m.Few discrepancy between simulation and the experiment existed. The Fluent software could be taken to simulate and optimize the air velocity in wood drying kiln. |
| |
Keywords: | wood drying kiln wind velocity field numerical simulation optimal condition |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《南京林业大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《南京林业大学学报(自然科学版)》下载全文 |
|