|
|||||
|
|
| 异型管双道次辊挤成型过程的研究 | |
| 引用本文： | 张小平,李志永,柳玉伟,张雪娜. 异型管双道次辊挤成型过程的研究[J]. 太原科技大学学报, 2005, 26(4): 247-250,256 |
| 作者姓名： | 张小平 李志永 柳玉伟 张雪娜 |
| 作者单位： | 1. 北京航空航天大学航空科学与工程学院,北京,100083;太原科技大学材料科学与工程学院,太原,030024 2. 北京航空航天大学航空科学与工程学院,北京,100083 3. 太原科技大学材料科学与工程学院,太原,030024 |
| 摘 要： | 利用大型非线性有限元分析软件对异型管双道次无芯棒辊挤成型过程进行了数值模拟,得到了成型过程中应力与变形的分布和变化情况以及变形后的异型管的断面形状,并通过实验验证了有限元分析的正确性.研究的结果可用于类似生产工艺的分析与设备设计. |
| 关 键 词： | 异型管 辊挤成型 数值模拟 |
| 文章编号： | 1673-2057（2005）04-0247-05 |
| 收稿时间： | 2005-04-07 |
| 修稿时间： | 2005-04-07 |
FEM Simulation of Double-Pass Roll Extrusion Forming Process of Square Shaped Tube |
|
| ZHANG Xiao-ping,LI Zhi-yong,LIU Yu-wei,ZHANG Xue-na. FEM Simulation of Double-Pass Roll Extrusion Forming Process of Square Shaped Tube[J]. Journal of Taiyuan University of Science and Technology, 2005, 26(4): 247-250,256 | |
| Authors: | ZHANG Xiao-ping LI Zhi-yong LIU Yu-wei ZHANG Xue-na |
| Affiliation: | 1. School of Aeronautic Science and Technology of Beijing University of Aeronautics and Astronautics, Beijing 100083, China; 2. College of Material Science and Engineering, Taiyuan University of Science and Teehnology,Taiyuan 030024,China |
| Abstract: | The non-mandrel double-pass roll extrusion process of square shaped tube was simulated using nonlinear FEM software. The distribution and variation of stress and deformation as well as the shape of the tube after forming were obtained. The simulation results were verified by experiments. The study provides a useful base for the propractice |
| Keywords: | shaped tube roll extrusion forming digital simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |