| 超低硫钢精炼工艺 |
| |
| 引用本文： | 陆钢,成国光,宋波,赵沛,王新华. 超低硫钢精炼工艺[J]. 北京科技大学学报, 2000, 22(4): 320-323 |
| |
| 作者姓名： | 陆钢 成国光 宋波 赵沛 王新华 |
| |
| 作者单位： | 1. 北京科技大学冶金学院，北京，100083
2. 钢铁研究总院, 北京, 100081 |
| |
| 基金项目： | 国家重点基础研究发展计划(973计划);G1998061500; |
| |
| 摘 要： | 在感应炉上进行了一系列对比实验，研究结果表明：顶渣＋喂线工艺比完全顶渣工艺具有更快的脱硫效果，含ＢａＯ精炼渣系比传统的ＣａＯ－ＣａＦ２渣系具有更强的脱硫能力；当钢中氧和硫都很低时，ＣａＳｉ合金能起到显著的深脱硫作用，由研究结果得出超低硫钢（ｗｓ〈０．００１０％）钢液精炼的主要工艺参数。
|
| 关 键 词： | 超低硫钢 精炼 动力学 脱硫 钢液 |
| 修稿时间： | 2000-01-05 |
Research on Ultra-low Sulphur Steel Refining Process |
| |
| LU Gang,Cheng Guoguang,SONG Bo,ZHAO Pei,WANG Xinhua. Research on Ultra-low Sulphur Steel Refining Process[J]. Journal of University of Science and Technology Beijing, 2000, 22(4): 320-323 |
| |
| Authors: | LU Gang Cheng Guoguang SONG Bo ZHAO Pei WANG Xinhua |
| |
| Abstract: | A serial of contrast experiments were carried out on induction furnace. It's found that a betterdesulphurization result exists in the top slag plus sire injection Process than in the single top slag process. Slag which contains BaO has stronger desulphurization ability than that does not. CaSi alloy can decrease the terminal sulphur content in the steel when [O] and [S] are low Further, some basic technological parameters were proposed for the refining of ultra-low sulphur steel. |
| |
| Keywords: | ultra-low sulphur steel secondary refining dynamics desulphurization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
