| 改性白云石凹凸棒土在橡胶中填充的可行性探讨 |
| |
| 引用本文： | 金叶玲,钱运华,程晓春,陈静. 改性白云石凹凸棒土在橡胶中填充的可行性探讨[J]. 南京理工大学学报(自然科学版), 2005, 29(6): 720-723 |
| |
| 作者姓名： | 金叶玲 钱运华 程晓春 陈静 |
| |
| 作者单位： | 淮阴工学院,化工系,江苏,淮安,223001 |
| |
| 基金项目： | 江苏省科技攻关立项项目（BE2004387）;江苏省教育厅自然科学指导性计划项目（00KJD430002） |
| |
| 摘 要： | 该文探讨了天然复合填料白云石凹凸棒土经表面改性后填充橡胶雨靴的可行性，并对填充样进行了力学测试和微观形貌考察。研究结果表明，经硬脂酸改性后的白云石凹凸棒土在胶料中填充量大幅度提高，可达到110g／100g胶料，并具有良好的相容性，可缩短混炼时间，胶料压延性能好，胶片平整光滑，光泽度好。与轻质碳酸钙相比，改性后的白云石凹凸棒土可以显著提高填充胶样的拉伸强度、300％定伸强度、断裂伸长率和粘附强度，分别比轻钙填充胶样提高了57．8％、100％、5．5％、16％。
|
| 关 键 词： | 白云石 凹凸棒土 填充 橡胶 |
| 文章编号： | 1005-9830(2005)06-0720-04 |
| 收稿时间： | 2005-04-26 |
| 修稿时间： | 2005-10-08 |
Filling Feasibility of Modified Dolomite-Attapulgite in Rubber |
| |
| JIN Ye-ling,QIAN Yun-hua,CHENG Xiao-chun,CHEN Jing. Filling Feasibility of Modified Dolomite-Attapulgite in Rubber[J]. Journal of Nanjing University of Science and Technology(Nature Science), 2005, 29(6): 720-723 |
| |
| Authors: | JIN Ye-ling QIAN Yun-hua CHENG Xiao-chun CHEN Jing |
| |
| Affiliation: | Department of Chemical Engineering, Huaiyin Institute of Technology, Huaian 223001, China |
| |
| Abstract: | This paper explores filling feasibility of modified dolomite-attapulgite(a nature compound filling) in boot surface rubber and makes a mechanics test and a microstructure analysis on filled samples.The experimental results indicate that the filling volume of dolomite-attapulgite modified by stearic acid increases,reaching 110 g/100 g rubber,and the filling is very compatible in boot surface rubber with shortening filling time.The mechanism performance is improved greatly after filling treatment,and the sample is more smooth and glossy.Compared with the light calcium carbonate,the rupture elongate ratio and the intension of tensile,300%modulus at definite elongation and adhesive can increase by 57.8%,100%,5.5%,16%,respectively. |
| |
| Keywords: | dolomite attapulgite filling rubbers |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
