| 不同端部形状的细长圆柱体的附加质量研究 |
| |
| 引用本文： | 张丹,冯双双,魏晓娟,孙磊,谢凌志,魏泳涛.不同端部形状的细长圆柱体的附加质量研究[J].重庆大学学报(自然科学版),2016,39(5):26-33. |
| |
| 作者姓名： | 张丹 冯双双 魏晓娟 孙磊 谢凌志 魏泳涛 |
| |
| 作者单位： | 1. 四川大学建筑与环境学院,成都,610065;2. 中国空气动力研究与发展中心,四川绵阳,629100;3. 四川电力职业技术学院动力工程系,成都,610072;4. 中国核动力研究设计院反应堆结构力学研究所,成都,610041 |
| |
| 基金项目： | 四川省科技厅应用基础研究项目（重大前沿）（2015JY0280）。 |
| |
| 摘 要： | 基于势流理论,并结合有限单元法,研究了在流体中运动物体的附加质量.首先,通过无限域中小球及管流中作横向运动的圆柱的附加质量的计算,验证了算法的正确性.其次,着重分析了具有不同端部形状的细长圆柱体在不同直径的无限长管流中沿轴向运动时的附加质量.结果表明:在管流外半径一定的情况下,细长圆柱体的附加质量与其柱体长度成线性关系,其斜率随着圆柱与管壁间距离的减小而迅速增大;而且,当圆柱体长度远大于其直径时,其两端的形状对其附加质量影响不大.
|
| 关 键 词： | 附加质量 势流 有限单元法 |
| 收稿时间： | 2015/10/12 0:00:00 |
Added mass of slender cylinders with different end shapes |
| |
| ZHANG Dan,FENG Shuangshuang,WEI Xiaojuan,SUN Lei,XIE Lingzhi and WEI Yongtao.Added mass of slender cylinders with different end shapes[J].Journal of Chongqing University(Natural Science Edition),2016,39(5):26-33. |
| |
| Authors: | ZHANG Dan FENG Shuangshuang WEI Xiaojuan SUN Lei XIE Lingzhi and WEI Yongtao |
| |
| Institution: | College of Architecture and Environment, Sichuan University, Chengdu 610065, P.R.China,Aerodynamics Research and Development Center of China, Mianyang 629100, Sichuan, P.R.China,Department of Power Engineering, Sichuan Electric Vocational and Technical College, Chengdu 610072, P.R.China,Institute of Reactor Structure Mechanics, Nuclear Power Institute of China, Chengdu 610041, P.R.China,College of Architecture and Environment, Sichuan University, Chengdu 610065, P.R.China and College of Architecture and Environment, Sichuan University, Chengdu 610065, P.R.China |
| |
| Abstract: | Based on the potential theory and the finite element method, the added mass of objects moving in fluid was studied. Firstly, the added mass of a ball in the infinite domain and the added mass of a cylinder in lateral motion in a tube were calculated to verify the validation of the codes. Then the added mass for slender cylinders with different end shapes moving axially in a long tube fluid was analyzed. The results show that under a given diameter of the tube, the added mass for the slender cylinder is proportional to its length. And the slope of the linear relationship increases rapidly with the decrease of the distance between the slender cylinder and tube wall. Moreover, when the length of the cylinder is much larger than its diameter, the shapes of the cylinder ends have little influence on the added mass. |
| |
| Keywords: | added mass potential flow finite element method |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《重庆大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《重庆大学学报(自然科学版)》下载免费的PDF全文 |
|
