首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于xPC的PMSM控制系统虚拟测试技术研究
引用本文:吴小役,王斌翊,李长红,翟晓军.基于xPC的PMSM控制系统虚拟测试技术研究[J].系统仿真学报,2007,19(7):1551-1553.
作者姓名:吴小役  王斌翊  李长红  翟晓军
作者单位:1. 西北机电工程研究所,陕西,咸阳,712099
2. 西北工业大学,陕西,西安,710072
摘    要:全数字化永磁同步电动机(PMSM)控制系统有着数模混合控制无法比拟的优点,硬件电路简单可靠,且可以实现复杂控制算法提高控制性能。但数字控制器中的数字信号无法直接用示波器观察,为了解决这一问题,提出了基于xPC的虚拟测试技术实现PMSM控制系统的实时测试,测试系统采用TCP/IP网络通讯协议和CAN总线协议传输数据。试验表明,该方法能够彻底的解决全数字化PMSM控制系统信号实时测试的难题。

关 键 词:PMSM  控制系统  CAN通讯  虚拟示波器  S函数
文章编号:1004-731X(2007)07-1551-03
收稿时间:2006-02-15
修稿时间:2007-01-15

Virtual Test Technique Study for PMSM Drives Based on xPC
WU Xiao-yi,WANG Bin-yi,LI Chang-hong,ZHAI Xiao-jun.Virtual Test Technique Study for PMSM Drives Based on xPC[J].Journal of System Simulation,2007,19(7):1551-1553.
Authors:WU Xiao-yi  WANG Bin-yi  LI Chang-hong  ZHAI Xiao-jun
Abstract:The fully digitized PMSM (permanent magnet synchronous motor) drives have the advantage that the analog digital control can not reach. Its hardware is simple and reliable, and it can realize complicated control method to improve control performance. But the signals in the digitized PMSM drives can not be directly observed by oscilloscope. To overcome this problem, virtual test technique based on the xPC was put forward. It uses TCP/IP and CAN communication protocol to transfer data, and display the real-time curves on the host computer and target computer by means of virtual oscilloscope. The test results manifest that this method can solve the problem completely for the signal real-time test of PMSM drives.
Keywords:xPC Target
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号