首页 | 本学科首页   官方微博 | 高级检索  
     检索      

喷动床多气体入口对燃料颗粒包覆工艺的影响
引用本文:徐小平,朱钧国,杨冰,张秉忠,潘金生.喷动床多气体入口对燃料颗粒包覆工艺的影响[J].清华大学学报(自然科学版),2000,40(12):63-66.
作者姓名:徐小平  朱钧国  杨冰  张秉忠  潘金生
作者单位:1. 清华大学,核能技术设计研究院,北京,100084
2. 清华大学,材料科学与工程系,北京,100084
基金项目:国家“八六三”高技术项目! (86 3- 6 14- 0 2 )
摘    要:包覆燃料颗粒的制备是 10 MW高温气冷堆中的关键技术。论文介绍了一种用于生产包覆燃料颗粒的具有多气体入口的新颖喷动床 ,通过不同气体入口条件下的包覆试验 ,揭示了该喷动床具有包覆反应区向喷管区收缩的特点 ,该特点可使得包覆层更均匀 ,密度低 ,颗粒周期性循环对包覆层性能波动的影响减弱等等 ;同时该喷动床的喷动高度低 ,减少了颗粒因碰撞而导致的包覆层裂纹。因此 ,该喷动床适合于包覆燃料颗粒的制备

关 键 词:喷动床  多气体入口  包覆燃料颗粒
修稿时间:2000-02-25

Fuel particle coating in a multiple gas inlet spouted bed
XU Xiaoping,ZHU Junguo,YANG Bing,ZHANG Bingzhong,PAN Jinsheng.Fuel particle coating in a multiple gas inlet spouted bed[J].Journal of Tsinghua University(Science and Technology),2000,40(12):63-66.
Authors:XU Xiaoping  ZHU Junguo  YANG Bing  ZHANG Bingzhong  PAN Jinsheng
Abstract:The fuel particle coating is a key technology for the 10MW high temperature gas cooled reactor (HTR 10). A new spouted bed with multiple gas inlets was used for the fuel particle coating. Coating experiments with different gas inlet conditions showed that the coating reaction zone in the spouted bed was limited to the bed spout. Since the coating reaction zone was limited to the spout, the coating layer was more uniform and the layer density was low with little effect of particle circulation on the coating layer properties. A lower spout height in the bed reduced the coating layer crack. Accordingly, the spouted bed is effective for coating fuel particles.
Keywords:spouted  bed  multiple gas inlets  coated fuel particles
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号