| Optimization of Cutting Parameters for Face Milling Titanium Alloy Using MQL |
| |
| 引用本文： | AHMED Hassan 姚振强. Optimization of Cutting Parameters for Face Milling Titanium Alloy Using MQL[J]. 东华大学学报(英文版), 2005, 22(2): 9-12 |
| |
| 作者姓名： | AHMED Hassan 姚振强 |
| |
| 作者单位： | Department of Manufacturing and Automation, Shanghai Jiaotong University, Shanghai 200030 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | When using MQL as a cooling technique, many parameters have to be adjusted. The Taguchi method was used in this study to investigate the cutting characteristics of face milling of titanium alloys using PVD-coated inserts. To find the optimal volume removed and surface roughness, an orthogonal array, the signal-to-noise （S/N） ratio and the analysis of variance （ANOVA） were employed. The optimum cutting parameters was obtained. Throughout this study, it was found that the feed rate is the most influencing cutting parameter in the face milling of titanium alloys.
|
| 关 键 词： | 端面铣削 钛合金 达柯铸铁 切削参数 |
| 收稿时间： | 2004-10-12 |
Optimization of Cutting Parameters for Face Milling Titanium Alloy Using MQL |
| |
| AHMED Hassan,YAO Zhen-qiang. Optimization of Cutting Parameters for Face Milling Titanium Alloy Using MQL[J]. Journal of Donghua University, 2005, 22(2): 9-12 |
| |
| Authors: | AHMED Hassan YAO Zhen-qiang |
| |
| Abstract: | When using MQL as a cooling technique, many parameters have to be adjusted. The Taguchi method was used in this study to investigate the cutting characteristics of face milling of titanium alloys using PVD-coated inserts. To find the optimal volume removed and surface roughness, an orthogonal array, the signal-to-noise (S/N) ratio and the analysis of variance (ANOVA) were employed. The optimum cutting parameters was obtained. Throughout this study, it was found that the feed rate is the most influencing cutting parameter in the face milling of titanium alloys. |
| |
| Keywords: | Taguchi method milling titanium alloy MQL |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
