| 共混工艺对PA6/POE-g-MAH/OMMT共混物形态和性能的影响 |
| |
| 引用本文： | 罗金中,熊玉竹,王力,黄书琴.共混工艺对PA6/POE-g-MAH/OMMT共混物形态和性能的影响[J].湖南师范大学自然科学学报,2011,34(5):60-65. |
| |
| 作者姓名： | 罗金中 熊玉竹 王力 黄书琴 |
| |
| 作者单位： | 贵州大学材料科学与冶金工程学院,中国贵阳550003;国家复合改性聚合物材料工程技术研究中心,中国贵阳550014 |
| |
| 基金项目： | 贵州大学引进人才科研项目,贵州大学人基合字2009(013号) |
| |
| 摘 要： | 采用2种不同的共混工艺制备了马来酸酐接枝(乙烯/辛烯)共聚物(POE-g-MAH)/有机蒙脱土(OMMT)/尼龙6(PA6)复合材料.借助扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)等手段对复合物的形貌和结构进行了表征,并测试了复合材料的热力学性能.实验结果表明工艺1(两次熔融)条件所得到复合材料为“沙...
|
| 关 键 词： | PA6 POE-g-MAH OMMT 共混工艺 沙袋结构 |
Influence of Blending Technology on the Form and Properties of PA6/POE-g-MAH/OMMT Blend |
| |
| LUO Jing-zhong,XIONG Yu-zhu,WANG Li,HUANG Shu-qin.Influence of Blending Technology on the Form and Properties of PA6/POE-g-MAH/OMMT Blend[J].Journal of Natural Science of Hunan Normal University,2011,34(5):60-65. |
| |
| Authors: | LUO Jing-zhong XIONG Yu-zhu WANG Li HUANG Shu-qin |
| |
| Institution: | LUO Jing-zhong1,2,XIONG Yu-zhu1,2*,WANG Li1,HUANG Shu-qin1,2(1.College of Materials Science and Metallurgy Engineering,Guizhou University,Guiyang 550003,China,2.National Engineering Research Center for Compounding and Modification of Polymeric Materials,Guiyang 550014,China) |
| |
| Abstract: | The composite materials,maleic anhydride grafted(ethylene/octene) copolymer(POE-g-MAH)/organic montmorillonite(OMMT)/nylon 6(PA6),were prepared by using two kinds of different blending methods.The morphology and structure were characterized by scanning electron microscope(SEM),transmission electron microscope(TEM) and X-ray diffraction(XRD),at the same time thermodynamics performance of the composites was also measured.The results show that the particles(POE-g-MAH/OMMT) with sandbag structure were evenly di... |
| |
| Keywords: | PA6 POE-g-MAH OMMT blending technology sandbags structure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
