首页 | 本学科首页   官方微博 | 高级检索  
     检索      

放射性金属废物再利用的表面剂量率接收限值研究
引用本文:王琪,任丽丽,姚振宇.放射性金属废物再利用的表面剂量率接收限值研究[J].南华大学学报(自然科学版),2023(6):93-98.
作者姓名:王琪  任丽丽  姚振宇
作者单位:中核环保有限公司,北京 100045;中核智慧环境科技有限公司,江苏 常州 213164;中核环保工程有限公司,北京 100024
摘    要:本文采用倒推法,从放射性金属再利用最终产品所遵从的照射剂量率约束值出发,确定了熔炼后中间产品中的放射性核素活度浓度限值,最后推导出了熔炼厂接收放射性金属废物的表面剂量率限值(简称:表面剂量率接收限值)。表面剂量率满足该限值的废金属,再利用得到的最终产品满足规定的照射剂量率要求。

关 键 词:放射性金属废物  活度浓度  表面剂量率接收限值
收稿时间:2023/12/11 0:00:00

Study on Acceptance Limits of Surface Dose Rate for Reuse of Radioactive Metal Waste
WANG Qi,REN Lili,YAO Zhenyu.Study on Acceptance Limits of Surface Dose Rate for Reuse of Radioactive Metal Waste[J].Journal of Nanhua University:Science and Technology,2023(6):93-98.
Authors:WANG Qi  REN Lili  YAO Zhenyu
Institution:CNNC Environmental Protection Co., Ltd., Beijing 100045, China;CNNC Intelligent Environmental Co., Ltd., Changzhou, Jiangsu 213164, China;CNNC Environmental Protection Engineering Co., Ltd., Beijing 100024, China
Abstract:By the inverse method, starting from the restrictive radiation dose rate followed by the final product reusing nuclear facility waste metal, the concentration limit of radioactive nuclide activity in intermediate ingot after melting, is determined. Finally, the surface dose rate limit (referred to as the surface dose rate acceptance limit) for receiving nuclear facility waste metal in melting plant is derived. The waste metal with a surface dose rate that meets the limit is reused to obtain a final product that meets the regulation requirements of irradiation dose rate.
Keywords:radioactive metal waste products  activity concentration  acceptance limit of surface dose rate
点击此处可从《南华大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《南华大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号