| 多热源合成SiC传热规律 |
| |
| 引用本文： | 陈杰,王晓刚,郭继华.多热源合成SiC传热规律[J].北京科技大学学报,2005,27(5):536-539. |
| |
| 作者姓名： | 陈杰 王晓刚 郭继华 |
| |
| 作者单位： | 西安科技大学材料科学与工程系，西安科技大学材料科学与工程系，西安科技大学材料科学与工程系 西安 710054，西安 710054，西安 710054 |
| |
| 基金项目： | 国家自然科学基金
,
陕西省教育厅资助项目 |
| |
| 摘 要： | 对多热源合成SiC冶炼炉的温度场进行了数值模拟,研究了冶炼炉内的温度分布、热流强度以及温度梯度的动态变化规律,揭示了多热源合成SiC的传热传质规律.研究表明,由于多热源之间的屏蔽作用与热能叠加作用,导致多热源合成SiC技术比Acheson单热源炉的单炉产量提高48.1%,特、一级品率提高30%,节能10%以上,并且杜绝了单热源生产中频繁喷炉事故,使生产更安全.
|
| 关 键 词： | 多热源炉 碳化硅 传热传质规律 温度场 数值模拟 多热源合成 传热规律 silicon carbide synthesis transfer 安全 事故 喷炉 生产 节能 一级品率 产量提高 单炉 Acheson 叠加作用 热能 屏蔽作用 传质规律 动态变化规律 温度梯度 |
| 收稿时间： | 09 1 2004 12:00AM |
| 修稿时间： | 05 30 2005 12:00AM |
Heat transfer law in multi-heat-source synthesis of silicon carbide |
| |
| CHEN Jie, WANG Xiaogang, GUO Jihua.Heat transfer law in multi-heat-source synthesis of silicon carbide[J].Journal of University of Science and Technology Beijing,2005,27(5):536-539. |
| |
| Authors: | CHEN Jie WANG Xiaogang GUO Jihua |
| |
| Abstract: | Through numerically simulating the temperature field in a multi-heat-source synthetic SiC furnace, the temperature distribution at characteristic points was obtained, and the dynamic laws of thermal gradient and thermal flow intensity were put forward. The heat and mass transfer law in multi-heat-source synthesis of silicon carbide were revealed. It was shown that due to the superposition effect of thermal fields and the shielding action of furnace cores, the SiC output of the multi-heat-source furnace increased by 48.1% compared with that of an Acheson single-heat-source furnace, the highest grade SiC increased by 30%, and the consumed energy reduced more than 10%. In addition, the frequent spouting was diminished, and the furnace was become more productive and safe. |
| |
| Keywords: | multi-heat-source furnace silicon carbide heat and mass transfer temperature field numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
