| 共晶体组织对Ag-CdO触头感应钎焊剪切强度的影响 |
| |
| 引用本文： | 祁少飞. 共晶体组织对Ag-CdO触头感应钎焊剪切强度的影响[J]. 太原科技大学学报, 2003, 24(2): 117-119 |
| |
| 作者姓名： | 祁少飞 |
| |
| 作者单位： | 太原锅炉集团有限公司,太原,030024 |
| |
| 摘 要： | 介绍了感应钎焊氧化镉Ag CdO12 触头剪切强度试验结果 ,探讨了组织形态对Ag CdO12 触头感应钎焊强度的影响。结果表明 :当触头钎着率在 75 %以上时 ,触头的剪切强度随着钎缝共晶体组织的减少而增大
|
| 关 键 词： | 共晶体:触头 钎焊 |
| 文章编号： | 1000-159X(2003)02-0117-03 |
| 修稿时间： | 2002-03-07 |
The Effct of Eutectic Microstructure on Shear Strength of the Induction Solder on the Ag-CdO Tip |
| |
| QI Shao fei. The Effct of Eutectic Microstructure on Shear Strength of the Induction Solder on the Ag-CdO Tip[J]. Journal of Taiyuan University of Science and Technology, 2003, 24(2): 117-119 |
| |
| Authors: | QI Shao fei |
| |
| Abstract: | In this paper,the shear strength test results of the induction solder oxide cadmium Ag CdO 12 tip were introduced.And the effect of structure state on the induction solder strength of the Ag CdO 12 tip was discussed.It was indicated that the shear strength of tips was increasing with the decreasing of solder eutectic structure when the solder rate of tips was above 75 percent. |
| |
| Keywords: | eutectic tip soder |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
