首页 | 本学科首页   官方微博 | 高级检索  
     检索      

压滤式污泥过滤比阻测定方法
引用本文:赵培涛,葛仕福,黄瑛,陈振乾,李响.压滤式污泥过滤比阻测定方法[J].东南大学学报(自然科学版),2011,41(1):155-159.
作者姓名:赵培涛  葛仕福  黄瑛  陈振乾  李响
作者单位:东南大学能源与环境学院;
摘    要:根据污泥机械脱水机理,建立了污泥比阻测试模型,设计了一种压滤式污泥比阻测试装置.结果表明:压滤法测得的污泥比阻Rp与布氏漏斗过滤实验测得的比阻Rv具有较好的一致性,两者线性相关系数R2=0.99,最大相对误差为8.0%,最小相对误差为1.0%,平均相对误差为5.0%;滤板开孔率的大小不会影响污泥比阻的测定,但当开孔率小...

关 键 词:正压过滤  污泥脱水性能  过滤比阻  过滤速度

Measurement of specific resistance to filtration of sludge by pressure filtration
Zhao Peitao,Ge Shifu,Huang Ying,Chen Zhenqian,Li Xiang.Measurement of specific resistance to filtration of sludge by pressure filtration[J].Journal of Southeast University(Natural Science Edition),2011,41(1):155-159.
Authors:Zhao Peitao  Ge Shifu  Huang Ying  Chen Zhenqian  Li Xiang
Institution:Zhao Peitao Ge Shifu Huang Ying Chen Zhenqian Li Xiang(School of Energy and Environment,Southeast University,Nanjing 210096,China)
Abstract:A pressure filtration device was designed based on the principle of mechanical dewatering.A corresponding SRF(specific resistance to filtration) testing model was established.The test results show that SRF Rp measured with pressure filtration method(PFM) has a good consistency with SRF Rv measured with Buchner funnel filtration,whose linear correlation coefficient R2 is 0.99,the maximum and minimum relative error are 8%,1.0% respectively,and the average relative error is 5.0%.The porosity of filtrate plate ...
Keywords:pressure filtration  sludge dewaterability  specific resistance to filtration  filtrate speed  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号