首页 | 本学科首页   官方微博 | 高级检索  
     

随钻扩眼钻井钻进趋势影响因素
引用本文:夏焱,管志川. 随钻扩眼钻井钻进趋势影响因素[J]. 中国石油大学学报(自然科学版), 2008, 32(6)
作者姓名:夏焱  管志川
作者单位:1. 中石油钻井工程技术研究院,北京100195;中国石油大学石油工程学院,山东东营257061
2. 中国石油大学石油工程学院,山东东营,257061
基金项目:国家高技术研究发展计划(863计划)  
摘    要:以钻进趋势角作为评价指标,对使用随钻扩眼工具进行钻进时的钻进趋势进行了分析.结果表明:对于偏心扩眼钻头,钻压分配比在一定条件下能够改变钻具的钻进趋势,因此在钻具组合设计中不能按照常规钻头来对待;对于钻具组合设计,将扩眼体位于井眼高边时是否满足防斜要求作为设计依据;对于独立结构扩眼器,钻压分配比的变化通常对钻具钻进趋势的影响较小,独立结构扩眼器的防斜主要依赖于领眼钻头与扩眼器之间稳定器位置的调节.

关 键 词:随钻扩眼工具  底部钻具组合  钻进趋势  参数设计

Influencing factors of drilling tendency in process of reaming while drilling
XIA Yan,GUAN Zhi-chuan. Influencing factors of drilling tendency in process of reaming while drilling[J]. Journal of China University of Petroleum (Edition of Natural Sciences), 2008, 32(6)
Authors:XIA Yan  GUAN Zhi-chuan
Affiliation:XIA Yan1,2,GUAN Zhi-chuan2(1.Drilling Research Institute,PetroChina,Beijing 100195,China,2.College of Petroleum Engineering in China University of Petroleum,Dongying 257061,China)
Abstract:Taking drilling tendency angles as evaluation parameters,the drilling tendencies of reaming while drilling(RWD) tools were analyzed.The results show that for eccentric reaming bits,the ratio of weight on bit(WOB) may have a great effect on the drilling tendency in certain conditions,and RWD tools can not be treated as the normal bit in the process of bottom hole assembly(BHA) design.And it can be the design foundation that the design parameters of BHA can meet the demands of borehole inclination when the re...
Keywords:reaming while drilling tools  bottom hole assembly  drilling tendency  parameters design  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号