| 飞剪速度基准的研究 |
| |
| 引用本文： | 葛延津,高峰,陈栋.飞剪速度基准的研究[J].东北大学学报(自然科学版),2003,24(12):1137-1140. |
| |
| 作者姓名： | 葛延津 高峰 陈栋 |
| |
| 作者单位： | 东北大学,信息科学与工程学院,辽宁,沈阳,110004 |
| |
| 基金项目： | 国家科技部创新基金资助项目(01C2621210454) |
| |
| 摘 要： | 给出了飞剪在启动加速阶段、剪切的匀速运动阶段以及剪切完后返回的定位阶段,速度的原基准与飞剪的速度实际基准之间的关系·速度的原基准与速度实际基准之间的关系决定了飞剪的剪切精度、定位的准确度以及轧件的端面的平滑等技术指标·这种关系由计算机运算与输出,并在钢厂得以成功应用·实践证明,由这种算法得出的飞剪速度实际基准容易由计算机实现且是准确的·
|
| 关 键 词： | 飞剪 速度原基准 速度实际基准 同步剪切区 减速定位区 |
| 文章编号： | 1005-3026(2003)12-1137-04 |
| 修稿时间： | 2003年6月2日 |
Study on Velocity Reference of Flying Shear |
| |
| GE Yan-jin,GAO Feng,CHEN Dong.Study on Velocity Reference of Flying Shear[J].Journal of Northeastern University(Natural Science),2003,24(12):1137-1140. |
| |
| Authors: | GE Yan-jin GAO Feng CHEN Dong |
| |
| Institution: | (1) Sch. of Info. Sci. and Eng., Northeastern Univ., Shenyang 110004, China |
| |
| Abstract: | ?The relation between primary and actual velocity reference of a flying shear is discussed during three successive phases, i,e., start-up acceleration, as-sheared constant velocity and after-shear returning/positioning. Such technological indices as shearing precision and positioning accuracy of flying shear and smoothness of cut end face of workpieces all depend on the relation between the two velocity references. The relation shall be calculated and output on computer, and it has been successfully applied to some steel rolling mills. The applications showed that the actual velocity reference of flying wheel derived here is easy to implement on computer and quite accurate. |
| |
| Keywords: | flying shear actual velocity reference primary velocity reference synchronization cutting zone deceleration positioning zone |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《东北大学学报(自然科学版)》下载免费的PDF全文 |
