|
|||||
|
|
| 汽车用钢连铸坯的高温力学性能 | |
| 引用本文： | 刘青,张立强,王良周,丁秀中,曹立国,齐永革,刘彦伟. 汽车用钢连铸坯的高温力学性能[J]. 北京科技大学学报, 2006, 28(2): 133-137 |
| 作者姓名： | 刘青 张立强 王良周 丁秀中 曹立国 齐永革 刘彦伟 |
| 作者单位： | 1. 北京科技大学冶金与生态工程学院,北京,100083 2. 北京科技大学冶金与生态工程学院,北京,100083;石家庄钢铁有限责任公司炼钢厂,石家庄,050031 3. 石家庄钢铁有限责任公司炼钢厂,石家庄,050031 |
| 摘 要： | 运用经典热模拟的方法研究石钢电炉生产汽车用钢的连铸坯高温力学性能,获得了五个钢种热塑性曲线和强度曲线.针对不同方向铸坯取样的结果与其他研究结果作了对比.运用扫描电镜对试样拉断后的断口形貌进行观察,得出了相应钢在各温度区域的断裂机理.讨论了连铸坯质量与高温力学性能的关系. |
| 关 键 词： | 汽车用钢 连铸 高温力学性能 二次冷却 大方坯 汽车用钢 连铸坯 高温 力学性能 steel automobile continuously cast mechanical properties temperature 关系 铸坯质量 断裂机理 温度区域 断口形貌 试样 扫描电镜 结果 取样 方向 强度曲线 |
| 收稿时间： | 2005-04-26 |
| 修稿时间： | 2005-10-08 |
High temperature mechanical properties of continuously cast blooms for automobile steel |
|
| LIU Qing,ZHANG Liqiang,WANG Liangzhou,DING Xiuzhong,CAO Liguo,QI Yongge,LIU Yanwei. High temperature mechanical properties of continuously cast blooms for automobile steel[J]. Journal of University of Science and Technology Beijing, 2006, 28(2): 133-137 | |
| Authors: | LIU Qing ZHANG Liqiang WANG Liangzhou DING Xiuzhong CAO Liguo QI Yongge LIU Yanwei |
| Abstract: | High temperature mechanical properties of 5 automobile steel grades produced by the EAF steelmaking workshop of Shijiazhuang Iron & Steel Co.Ltd.(Shigang Steel)were investigated by the classical thermal simulating method.Hot ductility and strength curves of these steels were measured with a hot stress/strain test machine.Results in different sampling ways for blooms and a comparison with other results were discussed.The embrittlement and fracture mechanisms of these respective steels were clarified based on examination to the fracture surface of specimens with scanning electronic microscope.The relation between bloom quality and high temperature mechanical properties was discussed. |
| Keywords: | automobile steel continuous casting high temperature mechanical property secondary cooling bloom |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |