| 应用于流化床的电容探针测量系统 |
| |
| 引用本文： | 李红民 周涛 王鹏 赵香龙 郑义忠 董孝义. 应用于流化床的电容探针测量系统[J]. 天津大学学报(自然科学与工程技术版), 2005, 38(10): 923-926 |
| |
| 作者姓名： | 李红民 周涛 王鹏 赵香龙 郑义忠 董孝义 |
| |
| 作者单位： | 南开大学信息技术科学学院，天津大学精密测试技术及仪器国家重点实验室，天津大学精密测试技术及仪器国家重点实验室，清华大学热能工程系，天津大学精密测试技术及仪器国家重点实验室，南开大学信息技术科学学院 天津 300071，天津 300072，天津 300072，北京 100084，天津 300072，天津 300071 |
| |
| 基金项目： | 国家自然科学基金资助项目(50306012)． |
| |
| 摘 要： | 对应用于气固两相流局部颗粒浓度分布的电容探针测量系统进行研究,分析了探针型电容传感器工作原理,并根据国内外电容探针测量模型的发展现状,提出了一种新型电容探针测量系统,利用其完成对流化床内局部颗粒浓度分布的测量.通过作为信号获取部分的运算式调幅电路,将测量信号通过USB接口与基于虚拟仪器的数据处理部分相结合,并对该测量系统在稠相气固流动系统中进行了标定.各项实验数据表明,该系统符合设计要求,具有良好的精度和稳定性,并已成功应用于实际测量中.
|
| 关 键 词： | 流化床 电容探针 颗粒浓度 标定 |
| 文章编号： | 0493-2137（2005）10-0923-04 |
| 收稿时间： | 2004-06-01 |
| 修稿时间： | 2004-06-012004-12-01 |
Capacitance Probe Measurement System for Fluid Bed |
| |
| LI Hong-min, ZHOU Tao, WANG Peng, ZHAO Xiang-long, ZHENG Yi-zhong, DONG Xiao-yi. Capacitance Probe Measurement System for Fluid Bed[J]. Journal of Tianjin University(Science and Technology), 2005, 38(10): 923-926 |
| |
| Authors: | LI Hong-min ZHOU Tao WANG Peng ZHAO Xiang-long ZHENG Yi-zhong DONG Xiao-yi |
| |
| Affiliation: | 1. College of Information Technical Science, Nankai University, Tianjin 300071 , China; 2. State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China; 3. Department of Thermal Engineering, Tsinghua University, Beijing 100084, China |
| |
| Abstract: | Capacitance probe measurement systems for partial solids volume concentration in the dense gas-solid flow were studied and the principles of the capacitance probe were analyzed. A new capacitance probe measurement system was proposed based on the status quo of capacitance probe models and furthermore applied to partial solids volume concentration measurement in fluid bed. The principle and structure of the operational translation circuit which worked as signal capture were presented. Then the measurement signal was combined with the data processing in a virtual instrument by a universal serial bus (USB) interface. System calibration was implemented in the the dense gas-solid flow system. The experimental data show that this system meets the design requirements, and excels in accuracy and stability. And it has already been utilized in field measurement. |
| |
| Keywords: | fluid bed capacitance probe solids volume concentration calibration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
