| 气体离心机供料射流的三维数值模拟 |
| |
| 引用本文： | 姜东君,曾实. 气体离心机供料射流的三维数值模拟[J]. 清华大学学报(自然科学版), 2011, 0(2): 225-229 |
| |
| 作者姓名： | 姜东君 曾实 |
| |
| 作者单位： | 清华大学工程物理系; |
| |
| 基金项目： | 国家自然科学基金资助项目(10875069,11075088) |
| |
| 摘 要： | 通过使用有限体积法和隐式二阶迎风格式求解了三维Navier-Stokes方程组,研究了气体离心机内部供料射流。得到不同供料压强条件下供料射流流场的三维分布,数值模拟结果表明:供料射流对离心机内部流场的影响随供料压强的增大而增大;当供料压强为3 kPa时,Mach盘出现在无量纲半径0.81处。由于强旋条件下的供料射流结构较为复杂,实际供料流动情况与均匀供料假设存在较大差异,因此根据射流流场分布对环流计算边界条件进行修正,将更准确地评估离心机分离性能。
|
| 关 键 词： | 气体离心机 供料射流 数值模拟 分离性能 |
3-D numerical simulations of the feed jet flow in a gas centrifuge |
| |
| JIANG Dongjun,ZENG Shi. 3-D numerical simulations of the feed jet flow in a gas centrifuge[J]. Journal of Tsinghua University(Science and Technology), 2011, 0(2): 225-229 |
| |
| Authors: | JIANG Dongjun ZENG Shi |
| |
| Affiliation: | JIANG Dongjun,ZENG Shi(Department of Engineering Physics,Tsinghua University,Beijing 100084,China) |
| |
| Abstract: | The feed jet flow in a gas centrifuge was investigated using the finite volume method with a second order upwind implicit scheme to solve the 3-D Navier-Stokes equations.The 3-D distribution of the feed jet flow field was obtained for different feed pressures.The numerical simulations show that the influence of the feed jet on the flow field inside the gas centrifuge becomes stronger with increasing feed pressure.A Mach disk appears at the dimensionless radius of 0.81 when the feed pressure is 3 kPa.Since t... |
| |
| Keywords: | gas centrifuge feed jet flow numerical simulation separation performance |
| 本文献已被 CNKI 等数据库收录！ |
|
