| 热处理工艺对60CrNiMo钢组织与力学性能的影响 |
| |
| 引用本文： | 顾丽媛,吴开明,陈思思,胡 锋,汪兴隆. 热处理工艺对60CrNiMo钢组织与力学性能的影响[J]. 武汉科技大学学报, 2014, 37(5): 337-340 |
| |
| 作者姓名： | 顾丽媛 吴开明 陈思思 胡 锋 汪兴隆 |
| |
| 作者单位： | 1.高性能钢铁材料及其应用湖北省协同创新中心,湖北 武汉, 430081;2.武汉科技大学国际钢铁研究院,湖北 武汉, 430081;1.高性能钢铁材料及其应用湖北省协同创新中心,湖北 武汉, 430081;2.武汉科技大学国际钢铁研究院,湖北 武汉, 430081;1.高性能钢铁材料及其应用湖北省协同创新中心,湖北 武汉, 430081;2.武汉科技大学国际钢铁研究院,湖北 武汉, 430081;1.高性能钢铁材料及其应用湖北省协同创新中心,湖北 武汉, 430081;2.武汉科技大学国际钢铁研究院,湖北 武汉, 430081;1.高性能钢铁材料及其应用湖北省协同创新中心,湖北 武汉, 430081;2.武汉科技大学国际钢铁研究院,湖北 武汉, 430081 |
| |
| 摘 要： | 研究采用多步低温等温贝氏体转变工艺处理后60CrNiMo钢组织与力学性能,用金相显微镜、扫描电镜及透射电镜观察60CrNiMo钢相组织,并进行硬度、拉伸和冲击等力学性能测试。结果表明,经淬火+亚温淬火+高温回火处理的60CrNiMo钢可得到细小均匀的二次回火马氏体+铁素体混合组织,其力学性能得到改善;采用三步低温等温贝氏体转变工艺可有效减少材料块状残余奥氏体和细化贝氏体晶粒,从而提高60CrNiMo钢力学性能。
|
| 关 键 词： | 60CrNiMo 亚温淬火 多步低温贝氏体转变 组织 力学性能 |
| 收稿时间： | 2014-03-29 |
Effect of different heat treatments on microstructure and mechanical properties of 60CrNiMo steel |
| |
| Gu Liyuan,Wu Kaiming,Chen Sisi,Hu Feng and Wang Xinglong. Effect of different heat treatments on microstructure and mechanical properties of 60CrNiMo steel[J]. Journal of Wuhan University of Science and Technology, 2014, 37(5): 337-340 |
| |
| Authors: | Gu Liyuan Wu Kaiming Chen Sisi Hu Feng Wang Xinglong |
| |
| Affiliation: | 1. Hubei Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China;2. International Iron and Steel Institute, Wuhan University of Science and Technology, Wuhan 430081, China;1. Hubei Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China;2. International Iron and Steel Institute, Wuhan University of Science and Technology, Wuhan 430081, China;1. Hubei Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China;2. International Iron and Steel Institute, Wuhan University of Science and Technology, Wuhan 430081, China;1. Hubei Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China;2. International Iron and Steel Institute, Wuhan University of Science and Technology, Wuhan 430081, China;1. Hubei Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China;2. International Iron and Steel Institute, Wuhan University of Science and Technology, Wuhan 430081, China |
| |
| Abstract: | Microstructure and mechanical properties of 60CrNiMo steel were investigated by means of different heat treatments. The phase microstructure was studied by OM, SEM and TEM. Mechanical properties, including hardness, tensile and impact toughness were tested after different heat treatments. The results show that after isothermal quenching, subcritical quenching and tempering, the mixed microstructures are thin tempered martensite and ferrite and the mechanical properties of 60CrNiMo steel have been improved. The blocky retained austenite is reduced and the bainite plate is refined after multistep isothermal bainitic transformation. |
| |
| Keywords: | 60CrNiMo steel subcritical quenching multistep isothermal bainite transformation microstructure mechanical property |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《武汉科技大学学报》浏览原始摘要信息 |
|
点击此处可从《武汉科技大学学报》下载免费的PDF全文 |
|
