| 基于FPGA的超声波碎石系统控制器研究与实现 |
| |
| 作者姓名： | 张 坤 周凤星 严保康 |
| |
| 作者单位： | 1.武汉科技大学信息科学与工程学院, 湖北 武汉, 430081;1.武汉科技大学信息科学与工程学院, 湖北 武汉, 430081;1.武汉科技大学信息科学与工程学院, 湖北 武汉, 430081 |
| |
| 基金项目： | 国家自然科学基金资助项目(61174106)；武汉科技大学大学生创新基金(11ZRA175). |
| |
| 摘 要： | 设计一种基于FPGA的超声波碎石系统信号发生与自动调节输出控制器。采用FPGA实现直接频率合成技术,采用FPGA监控换能器两端输出电压与电流的TTL电平信号,根据电流、电压相位差来控制输入正弦波信号的频率,最终实现控制器的设计。实验结果表明,该控制器输出信号稳定,系统反馈调节精度高。
|
| 关 键 词： | FPGA 超声波碎石 控制器 反馈调节 |
| 收稿时间： | 2013/10/7 0:00:00 |
Research and implementation of ultrasonic lithotripsy system controller based on FPGA |
| |
| Authors: | Zhang Kun Zhou Fengxing and Yan Baokang |
| |
| Institution: | 1. College of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, China;1. College of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, China;1. College of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, China |
| |
| Abstract: | A FPGA-based controller for signal generation, automatic regulation and output used in the ultrasonic lithotripsy system was designed. It uses FPGA to realize direct frequency synthesis, and employs TTL level signal of the output voltage and current at both ends of FPGA monitoring transducer to adjust the frequency of the sinusoidal signal inputted on the basis of the current, voltage phase difference for the ultimate automatic control. Experimental results show that the controller is able to output stable signal and its feedback regulation is accurate. |
| |
| Keywords: | FPGA ultrasonic lithotripsy controller feedback regulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《》浏览原始摘要信息 |
| 点击此处可从《》下载免费的PDF全文 |
|
