|
|||||
|
|
| 薄板坯连铸连轧工艺制备TRIP钢的力学性能与组织 | |
| 引用本文： | 张迎晖,康永林,于浩,刘晓,方圆.薄板坯连铸连轧工艺制备TRIP钢的力学性能与组织[J].北京科技大学学报,2005,27(6):688-691. |
| 作者姓名： | 张迎晖 康永林 于浩 刘晓 方圆 |
| 作者单位： | 1. 北京科技大学材料科学与工程学院,北京,100083;江西理工大学,赣州,341000 2. 北京科技大学材料科学与工程学院,北京,100083 3. 上海宝钢集团公司,上海,200941 |
| 摘 要： | 在实验室条件下模拟薄板坯连铸连轧工艺试制了C-Si-Mn系TRIP钢.拉伸实验表明,实验钢的抗拉强度为610MPa,屈服强度为430MPa,屈强比为0.70,总延伸率为28.4%.组织观察发现,试样组织为铁素体 贝氏体 残余奥氏体的三相组织,实验钢中残余奥氏体的平均含量为5.8%. |
| 关 键 词： | TRIP钢 薄板坯连铸连轧 力学性能 组织演变 板坯连铸连轧 工艺制备 TRIP steel 力学性能 三相组织 process mechanical properties 平均含量 残余奥氏体 贝氏体 铁素体 试样 发现 组织观察 总延伸率 屈强比 抗拉强度 拉伸实验 连轧工艺 模拟 |
| 收稿时间： | 2004-10-14 |
| 修稿时间： | 2004-11-20 |
Microstructure and mechanical properties of TRIP steel by TSCR process |
|
| ZHANG Yinghui,KANG Yonglin,YU Hao,LIU Xiao,FANG Yuan.Microstructure and mechanical properties of TRIP steel by TSCR process[J].Journal of University of Science and Technology Beijing,2005,27(6):688-691. | |
| Authors: | ZHANG Yinghui KANG Yonglin YU Hao LIU Xiao FANG Yuan |
| Institution: | 1. Materials Science and Engineering School, University Science and Technology Beijing, Beijing 100083, China; 2. Jiangxi University of Science and Technology, Ganzhou 341000, China ;3. Shanghai Baosteel Group, Shanghai 200941, China |
| Abstract: | C-Si-Mn TRIP steel was prepared by TSCR process in laboratory simulation. The results of tensile experiment indicated that the mechanical properties were the tensile strength of 610 MPa, the yield strength of 430 MPa, the elongation of 28.4%, and the ratio of yield strength to tensile strength of 0.70. The micmstructure was comprised of ferrite, bainite and retained austenite. The result of quantitative colour metallography showed the retained austenite fraction around 5.8%. |
| Keywords: | TRIP steel TSCR mechanical property microstructure evolution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |